Setting Up
Note: If you want to use other speaker cable or need to lengthen the supplied cables, call Bose® customer service. See page 15 for descriptions of applicable accessories. The cus- tomer service numbers can be found inside the back cover.
Connect the Acoustimass® module to the center and front cube speakers
Use the 20 foot (6 m) cable with three pairs of wires to connect the Acoustimass module to the center and front cube speakers.
Note: You can use any cube array in any position.
1.Connect the wire pair marked CENTER to the cube array you have placed in the center speaker position. Press the terminal tab on the back of each speaker. Then, insert the marked wire into the red terminal and the plain wire into the black terminal. Release the tab to secure the wires in place. See Figure 8.
2.Connect the wire pair marked RIGHT to the cube array you have placed in the right front position (to the right of the TV as you face it) in the same way.
3.Connect the wire pair marked LEFT to the cube array you have placed in the left front position (to the left of the TV as you face it).
Figure 8
Making cube speaker connec- tions
Marked wire
to red terminal
10 | October 22, 2001 | AM19464_02_V.pdf |
