Bose 10 Series II manual Cleaning the speakers, Warranty period, Accessories, October

Maintaining Your Acoustimass® 10 Series II Speaker System

Cleaning the speakers

Wipe the cube speakers using a damp cloth. Do not use solvents or chemicals. Do not allow liquids to spill on or objects to drop into the Acoustimass module or the speaker grilles. You may vacuum the grilles carefully; the drivers are directly behind the grille cloth. No other maintenance is needed.

Warranty period

Bose® Acoustimass 10 Series II speakers are covered by a limited 5-year transferable warranty. Details of the coverage are explained on the warranty card packed with your speakers. Please fill out the information section on your card. The serial number is located on the Acoustimass module; you may choose to record it on page 3 of this guide. Then, please detach and mail the card to Bose in the pre-addressed envelope.

Bose will try to remedy any problem within the terms of your limited warranty.

Accessories

Floor stands: UFS-20B (black), UFS-20W (white)

Wall brackets: UB-20B (black), UB-20W (white)

Figure 12

Add-on connector for use with speaker wire

Add-on connector: PN189830 (see Figure 12)

Adapts other speaker cable for use with Acoustimass 10 Series II speakers

Extension cable (to extend length from Acoustimass module to receiver): PN187092-1 (black), PN187092-2 (white)

20' (6 m) ribbon with five pairs of wire

AM194646_02_V.pdf October 22, 2001 15