![To control a combination device](/images/new-backgrounds/9419/941941x1.webp)
English
DeutschEspañol FrançaisItliano Nederlands Svenska
CONTROLS AND INDICATORS
Follow the same procedure for each of your other devices, using the appropriate device code and source button for each one.
To control a combination device
•If you are programming the remote to control a combination device that has more than one source, such as a VCR/DVD unit, you can program the combination code into either remote control source. You may find it convenient to program the code twice
– once for the VCR and once for the DVD.
•To find the right device code, first search the “COMBINATION” listings in the universal remote device codes book. If you cannot find a valid code there, then search the listings for individual device types (TV, CBL, VCR, DVD, etc.).
Using the remote to watch TV
Note: In order to control your TV and other audio/video devices using the remote control, you must first program the remote with a device code for each device.
1.Press TV
2.Press the TV source button.
The button will flash to indicate | TV source | |
button | ||
that the remote control is in | ||
| ||
TV mode. |
|
3.Use the remote to select a channel and navigate menus. See “Using the CineMate® GS series II remote control” on page 21 for a complete description of the remote’s buttons. In addition to controlling TV functions, the remote will control the basic CineMate speaker functions, such as turning on the speaker system, changing the volume, and muting or turning off the speaker system.
19