![Cleaning your speaker system](/images/new-backgrounds/9419/941955x1.webp)
Svenska | Nederlands | FrançaisItliano | DeutschEspañol |
English
CARE AND MAINTENANCE
Replacing the CineMate® GS series II remote batteries
Replace both batteries when the remote control stops operating or its range seems reduced. Alkaline batteries are recommended.
1.Slide open the battery compartment cover on the back of the remote.
2.Remove both batteries.
Be sure to dispose of the batteries according to the regulations in your area.
3.Insert two AA
4.Slide the battery compartment cover back into place.
AA batteries (2)
Cleaning your speaker system
•You can clean the surface of your speakers, Acoustimass® module, and interface module with a soft, damp cloth. You can use an
•Do not use any sprays near the speakers. Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.
•Do not allow liquids to spill into any openings.
•The speaker grilles require no special care, although you may vacuum them carefully, if necessary.
Battery compartment cover
26