Operation
Adding another device to the speaker
Pair another device to the speaker by making the speaker discoverable.
1. Press Bluetooth® on the speaker, so the Bluetooth status indicator blinks blue.
2.On your device, turn Bluetooth on, locate the Bluetooth device list, and select
the device named “Bose SLIII.” If your device prompts you for a passcode, enter “0000” (four zeros).
When the device connects to the speaker, the Bluetooth status indicator turns to solid white.
Note: You can switch between connecting/connected and discoverable by pressing Bluetooth on the speaker.
Speaker memory
The speaker can remember up to six paired devices. If you pair the speaker with an additional device, the device least recently connected is no longer paired with the speaker.
Note: To clear the speaker memory of all devices, press and hold Bluetooth (about 10 seconds) until you hear a tone. All devices are cleared and the speaker becomes discoverable.
Reconnecting a device
When turned on, the speaker attempts to reconnect with a device in memory
starting with the last connected device. If the last connected device is not
available, the speaker connects to the next to last connected device, and so forth. The speaker searches for a paired device for approximately 30 seconds.
Switching to a different device
You can switch the speaker from your connected device to another previously paired device. The device you are switching to must be in the speaker memory.
1.On your previously paired device, make sure Bluetooth is turned on.
2.Press Bluetooth on the speaker to make the speaker discoverable.
The Bluetooth status indicator speaker blinks blue to show the speaker is discoverable.
3.On your device, select “Bose SLIII” from the Bluetooth device list.
The Bluetooth status indicator blinks white, while the speaker attempts to con- nect to the device.
When the speaker and Bluetooth device have successfullyconnected, the
Bluetooth status indicator changes from blinking to solid white and the speaker emits a tone.
10 - English