Operation
Pairing and connecting a device to the speaker
Before listening to music from your Bose® Soundlink® Bluetooth® speaker III, you must pair and connect your Bluetooth device to the speaker.
First-time setup
The first time you turn on your speaker, it is ready to pair and connect your first device.
1.Press Power to turn the speaker on.
The Bluetooth status indicator on the speaker blinks blue to show the speaker is discoverable.
2.On your device, turn Bluetooth on, locate the Bluetooth device list, and select
the device named “Bose SLIII.” If your device prompts you for a passcode, enter “0000” (four zeros).
Settings | Bluetooth | |
Bluetooth | ON | |
Devices |
|
|
Bose SLIII | Connected |
When pairing is complete and your device is connected to the speaker, the
Bluetooth status indicator on the speaker changes from blinking blue to solid white and the speaker emits a tone.
Note: If the speaker turns off after five minutes, it has not paired or connected with your device. Turn the speaker off and back on, and try pairing your device again. See “Troubleshooting” on page 16.
English - 9