REFERENCE
Svenska | Nederlands | FrançaisItliano | DeutschEspañol | EnglishDansk |
REFERENCE
System maintenance
Changing batteries is the only regular maintenance required.
However, switches inside the remote battery case can be changed, as needed (to select a new house code, for example). Similar changes may be required for any additional remotes, purchased for use in other rooms.
Note: For further information on switch settings refer to “Changing remote control switch settings” below.
Replacing the remote control batteries
Replace all four batteries when the remote control stops operating or its range seems reduced. Alkaline batteries are recommended.
1.Slide open the battery compartment on the back of the remote (Figure 19).
2.Insert four AAA or
3.Slide the battery compartment cover back into place.
Figure 19
Installing the remote | AAA batteries (4) |
control batteries |
|
+
+ +
+
Battery
compartment
Battery
compartment
cover
Changing remote control switch settings
Each LIFESTYLE® remote control uses a house code that corresponds to the house code set in the media center, enabling the two to communicate. If another LIFESTYLE® system nearby creates a conflict with your system, you can easily set a new house code in your media center and its remote control(s) with steps that follow.
Using the remote control:
1.Open the remote control battery cover and locate the miniature switches (Figure 20 on page 41).
2.Move one or more of switches 1, 2, 3, or 4 in the opposite direction from its current setting. Use a paper clip, ball point pen, or similar object.
Note: DO NOT change any other switch settings. Moving other switches may disable your remote control.
3.Replace the battery cover.
40
