Revox Re:sound L 34 manual Power handling capacity, Maintenance, English

34 Re:sound L

Power handling capacity

The power handling capacity stated on the type plate of your Revox loudspeakers refers to an amplifier with tone control set to linear.

It is possible to use these loudspeakers with amplifiers rated for a higher power output.

In this case however, you must ensure that the volume is only turned up to a level where your ear, which is usually a reliable measure, starts to notice an overload. First signs of overload are a heavy increase in distortions in the sound picture.

Your Revox speakers will not be damaged by a short-term over- load.

If the speaker chassis should be damaged by a longer-term over- load, this can be identified very readily by a trained service technician. In this case, your rights under the term of the Revox warranty are cancelled.

Maintenance

team by wellis uses exclusively leather which is resistant to stains and can be wiped clean. This makes caring for your Re:sound L speaker very easy. Clean the surface of the leather with gentle, soapy water, wipe off with clean water and dry it well. Then polish the leather up with a suitable cloth.

Make sure that no water comes into contact with the individual speaker chassis during cleaning or makes it way into the reflex opening in the rear of the speaker.

English

12