La Crosse Technology WS-7038U Ii The Wireless Rain Monitor, A Using The Table-Stand

II)THE WIRELESS RAIN MONITOR

The Rain Monitor can also be mounted in two ways:

•with the table stand or,

•on the wall with the use of a wall hanging screw (not included).

A)USING THE TABLE-STAND

1.The Rain Monitor comes with the table stand already mounted. If you wish to use the table-stand all that is required is to place the Rain Monitor in an appropriate location.

B)WALL MOUNTING

1.Remove the table stand. To do this, pull down on the stand from the rear and rotate forward. (Figure 3).

2.Fix a screw (not included) into the desired wall, leaving approximately 3/16 of an inch (5mm) extended from the wall. (Figure 4).

3.Place the Rain Monitor onto the screw using the hanging hole on the backside. Gently pull the Rain Monitor down to lock the screw into place.

MAINTENANCE & CARE

Figure 3

Figure 4

•Extreme temperatures, vibrations, and shock should be avoided to prevent damage to the units.

•Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents—they may mark and damage the displays and casings.

•Do not submerge in water.

•Immediately remove all low powered batteries to avoid leakage and damage. Replace with new batteries only, and of recommended size.

•Opening the casings invalidates the warranty. Do not try to repair the units. Contact La Crosse Technology for Repairs.

11