Setting Up Your Lifestyle® Stereo Amplifier
English
Figure 6
Remote microswitches
Setting up RC18S and RC38S remotes
Your additional remote is shipped from the factory already set up for a second room (room B). To make sure that this remote will work with your home entertainment system, do the follow- ing to check the house code setting.
1.Remove the remote control battery cover and locate the microswitches (Figure 6).
2.Make sure that the house code settings (switches 1, 2, 3, and 4) match the house code settings in your main room remote.
Note: If this remote is to be used beyond a second room, other switch settings will need to be changed. See “Setting Up Additional Rooms For Sound” on page 23.
House code switches
must match main room remote
ON |
Check the expansion protocol setting in your system
For the Lifestyle® stereo amplifier to work properly with your home entertainment system, the expansion protocol menu item must be set to Normal. To verify this:
1.Turn on your Lifestyle® DVD home entertainment system and your TV.
2.Press the System button on your main room remote.
3.Select the Audio tab and navigate down to Expansion Protocol.
4.Verify that the setting Normal is selected. If not, select Normal now.
5.Press the Exit button on the remote.
12
