Operating Your Wave® Radio
Setting the alarms
Note: There are two alarms indicated on the clock display as ALARM (primary) and ALARM 2 (secondary). You can set the wakeup time for either alarm with the radio on or off. The indica- tor for the selected alarm flashes when setting time or mode. The ALARM 2 indicator contin- ues flashing for 10 seconds after setting ALARM 2.
Wave Radio
Time | Alarm | Sleep |
| Tuning | Station |
1 | 2 | 3 |
| Presets |
|
4 | 5 | 6 |
| Volume | Mute |
AUX | AM | On |
FM | Off |
Wave Radio
Function | Control panel | Remote control |
To select which alarm to set – On the control panel, press and hold Alarm Set. Press Alarm Mode to select ALARM or ALARM 2. The indicator flashes for the alarm you are setting.
On the remote, press Time. Press Alarm 
to select ALARM 2 or to return to ALARM. The indicator flashes for the alarm you are setting.
Alarm
Set | Alarm Mode |
|
Time
To set the alarm time – On the control panel, hold down Alarm Set and press Tuning up (
) or down (
). The time display changes slowly at first, then more quickly. Release Tuning to stop.
On the remote, press Time. Press Tuning up (
) or down (
). The time dis- play changes slowly at first, then more quickly. Release Tuning to stop. Press Time to return to the current time display.
Alarm
Set
Time Alarm
Tuning
Tuning
To set the alarm mode – On the control panel, after selecting the alarm, release Alarm Set and press Alarm Mode to select one of the following alarm
modes (Press Alarm 
on the remote):
For tone only, press until you see the 
indicator.
For radio only, press until you see the 
indicator.
For tone and radio, press until you see both indicators 
.
When the alarm tone sounds, press Sleep/Snooze to turn the radio on. Press Sleep/Snooze to pause the radio for 10 minutes.
Alarm Mode
Sleep/Snooze
Sleep
To cancel the alarm mode | – Follow the directions for setting the alarm |
|
|
|
|
|
|
| ||
mode. Press Alarm Mode (control panel) or Alarm |
| (remote) until the |
|
|
|
|
|
|
| |
|
| Alarm Mode |
|
|
| |||||
display shows no alarm mode indicators. |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| |
To check the alarm setting | – On the control panel, press and hold |
|
|
|
|
|
|
| ||
Alarm Set to see the ALARM wakeup time and the preset station. While hold- | Alarm |
|
|
|
|
|
| |||
|
|
|
|
|
| |||||
ing Alarm Set, press Alarm Mode to see the ALARM 2 wakeup time and the | Set |
|
| Alarm Mode |
|
| ||||
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
| ||||
preset station.
On the remote, press Time to see the ALARM wakeup time. Press Alarm
to see the ALARM 2 wakeup time. Press Time again to return the dis-Time play to the current time. ALARM 2 flashes for 10 seconds.
To wake to a preselected radio station – On the control panel,
ONLY, select ALARM or ALARM 2. Press and hold Alarm Set, and then press one of the six station Presets buttons (you can change between AM and FM if needed). To clear the preset, press and hold Alarm Set and press the but- ton for that preset again.
1 | 2 | 3 |
Alarm | Presets |
|
Set |
| |
4 | 5 | 6 |
Use the control panel to
select this feature.
AM255380_01_V.PDF | October 22, 2001 | 21 |
