217
Convenient functions for audio CD creation
Section 4
Erasing CD-RW discs (CD-RW Erase)
If you are using CD-RW discs, you will be able to erase
unneeded data from the discs and reuse them for data
storage.
1.
Insert the CD-RW disc to be erased into the BR-
1600CD’s CD-R/RW drive.
The drive’s access indicator will begin to flash. Wait until
this indicator stops flashing and turns off before
proceeding.
2.
Press CD-R/RW [DATA SAVE/LOAD].
The Data CD Save/Load screen will appear.
fig.40-04d
3.
Move the cursor to the ERASE icon and press [ENTER/
YES].
Alternatively, you can press the corresponding FUNCTION
button if the ERASE icon is currently displayed.
The message “Erase Disc?” will appear.
fig.40-05d
4.
Press [ENTER/YES]. (If you do not want to erase the
disc, press [EXIT/NO].)
The data erasure will begin and the state of progress will be
displayed. When the message “Complete” appears and the
track buttons begin to flash, the erasure is complete.
5.
Press [EXIT/NO] several times to return to the top
screen.
6.
Press the CD-R/RW drive’s EJECT button to eject the
disc.
• This process results in all data being permanently
erased from a disc. Due caution must be observed—
always check first to make sure you don’t erase a
CD-RW disc that contains important data.
• Data erasure is possible only with CD-RW discs.
Data cannot be erased from CD-R discs.
• In certain cases, a period of several seconds will pass
before the disc is actually ejected.
• Once erasing has been started, it will not be possible
to cancel this process.
• The amount of time required for erasing data will
depend on the type of CD-RW disc used and the
volume of data that it contains.
BR-1600_R_e.book 217ページ ２００７年１２月６日　木曜日　午前９時５２分