Boss Audio Systems BR-1600CD Example 4: Moving audio data with MOVE + INS

Editing a recorded performance (Track Edit)

Section 1

Example 4: Moving audio data with MOVE + INS

fig.15-29

If you are using MOVE + INS, it will not be possible to

specify the same track as the source and destination.

Use [CURSOR] and the TIME/VALUE dial to choose

the tracks and V-Tracks to be used as the source and

destination.

fig.15-30d

If a name has been assigned to the selected track, it will

be displayed at this time.

If you want to move audio on other tracks using the

same settings (for range, position, etc.), move the cursor

to the position shown below and turn the TIME/

VALUE dial.

fig.15-31d

You will now be able to specify other tracks as the source

and destination of other move operations.

In this case, it is not possible to specify a destination

track that coincides with another source track.

If you want to cancel the move for a specific track, turn

the TIME/VALUE dial counterclockwise until a

question mark (?) is displayed.

• A move operation will not be performed for any line

containing one or more question marks.

• As Tracks 9/10 through 15/16 are stereo tracks, it will

not be possible to select either of their mono tracks

independent of the other.

Move the cursor to the right half of the screen and

specify the move range and destination positions.

fig.15-32d

Pressing [F1] (DISP.FMT.) at this time will allow you to

select how positions will be specified (i.e., by measure,

time, or marker).

The following parameters should now be set.

START (Start point):

This parameter is used to specify the start point of the

audio data to be moved.

END (End point):

This parameter is used to specify the end point of the

audio data to be moved.

TO (To point):

This parameter is used to specify the basic destination

point.

FROM (From point):

This parameter is used to specify the point within the

source audio data to be aligned with the To point.

Normally, this is set to the same value as the Start point.

• If time values are used to specify the above points and

you then switch the specification method to measures or

markers, a plus (+) character may be displayed to warn

that the indicated positions and actual positions are not

the same. If you want to specify points using measures

or markers, this discrepancy can be eliminated by using

the TIME/VALUE dial to make settings in each of the

relevant screens.

• If you want to set the move range as extending from the

start to the end of the song, press [F3] (SELECT ALL).

When you have made all of the necessary settings,

press [F4] (GO).

The audio data will now be moved, and when the

message “Complete!” appears, it indicates that this

operation has been completed.

Press [EXIT/NO] several times to return to the top

screen.

START/FROM

END TO

A'A'

Time

BR-1600_R_e.book 59ページ２００７年１２月６日　木曜日　午前９時５２分