244
Backing up the BR-1600CD’s data
Shortly after the connection has been established, the BR-
1600CD icon will appear on-screen.
fig.52-07a
5.
Double-click the “BR-1600CD.”
The files and folders from the BR-1600CD’s hard disk
will be displayed on the PC monitor.
fig.52-08
6.
Select all of the files and folders and copy them to the
backup folder on the computer.
It is good practice to create a new folder for the storage
of backup data.
7.
Quit the connection to the computer.
Drug the “BR-1600CD” icon to the Trash.
8.
Press BR-1600CD’s [EXIT/NO].
The USB screen will be displayed once again.
If you press [EXIT/NO] without quitting the connection
to the computer, “Disconnect USB, OK?” appear. In this
case, pressing [ENTER/YES] returns the USB menu
screen to the display.
9.
Press [EXIT/NO] to return to the Top screen.
At this point, you can safely disconnect the USB cable
from the BR-1600CD and the computer.
BR-1600CD
(Ex.)
Extra care should be taken to ensure that each and
every file and folder is selected and copied. If files or
folders are missed, the backup will be incomplete
and subsequent recovery operations may not be
possible.
If the current song contains newly recorded audio
data or newly modified settings, the message “Save
Current?” may be displayed during the backup
procedure. If you want to save your song before
starting the backup, press [ENTER/YES]; if this will
not be necessary, press [EXIT/NO]. Remember that
if you do not save a modified song at this time, all
newly recorded audio data, edited data, modified
mixer settings, etc. will be lost.
BR-1600_R_e.book 244ページ ２００７年１２月６日　木曜日　午前９時５２分