252

Loading WAV/AIFF files in BR-1600CD tracks (WAV/AIFF Import)

You can take WAV or AIFF files on your computer, such as
files created with audio software applications, and load them
to the BR-1600CD’s tracks.

●

Wave data in the following formats can be imported.
You cannot import wave data in other formats.

• WAV or AIFF format
• Mono or Stereo
• 8-bit or 16-bit
• Sampling Rate: 44.1 kHz

●

Add the extension “WAV” to imported WAV files and
the extension “AIF” to imported AIFF files.

●

Compressed WAV files or AIFF files cannot be loaded.

●

Extremely short waveform data (less than approximately
1 sec) cannot be loaded.

●

The loop point settings within an AIFF file will be
ignored.

With Windows

1.

Connect your computer and the BR-1600CD with a USB
cable.

2.

Confirm that the recorder is stopped, then press
[UTILITY].
The Utility Menu screen will appear.

fig.12-12d

3.

Move the cursor to the USB icon and press [ENTER/
YES].

Alternatively, you can press [F4] (USB) if the USB icon is
currently displayed.
The USB screen will appear.

fig.52-05d

4.

Move the cursor to the IMPORT icon and press
[ENTER/YES].
Alternatively, you can press [F3] (IMPORT).
The USB Import screen will appear.

fig.52-22d

5.

Use [CURSOR] and the TIME/VALUE dial to select the
track and the V-Track to be loaded.

When loading to the tracks in mono

Select the track 1–8.

fig.52-23d

When loading to the tracks in stereo

Select the track combination 1/2–15/16.

fig.52-24d

6.

Use [CURSOR] and the TIME/VALUE dial to specify
the measure or position in the track from which
loading is to start.

Pressing [F1] (DISP.FMT.) at this time will allow you
switch among the specification methods for positions
(i.e., by bar, time, or marker).

fig.52-25d

7.

Press [F4] (GO).

When the connection is complete, the message “Copy 1
Wave File In Computer To BR-1600CD’s USB Folder”
will appear.
After several moments, the BR-1600CD icon or the
“Removable Disk (*:)” icon will appear on the PC monitor.

fig.52-07

8.

Click the BR-1600CD icon or the “Removable Disk (*:)” icon.

The files and folders from the BR-1600CD’s hard disk
will be displayed on the PC monitor.

In some cases, a certain amount of time will pass before
the hard disk is displayed.
BR-1600CD
Removable Disk (*:)
(Ex.)
BR-1600_R_e.book 252ページ ２００７年１２月６日　木曜日　午前９時５２分