32
Phrase Loop Play
Phrase Loop is a recorder function that lets you record up to 38
seconds (when using monaural recording) of audio, and play it
back by operating a pedal. By layering sounds as you continue
real-time recording and playback, you can create a wide variety of
performances.
You can record a phrase loop with eects, or you can add eects
after a loop has been recorded. Adding eects after-the-fact lets
you create special eects with recorded performances.
* Recorded phrases are deleted when Phrase Loop is switched o
or when the power is turned o.
Reference
For more about Phrase Loop operation, refer to “Advanced:
Phrase Loop” (p. 18).

Setting Phrase Loop

Phrase Loop oers a variety of modes. By changing the settings, you
can use this function in various ways.

Setting procedure

1. Press the [SYSTEM] button.
2. Turn knob [4] to select “PHRASE LOOP” in the left display.
3. Use knobs [5]–[8] to select the desired settings.
Parameter Value Explanation
Page 1
[5] MODE
PERFORM
The sound processed by the
eects will be recorded.
This lets you create a variety
of performances by layering
dierent sounds.
PATCH EDIT
The sound before being
processed by the eects will be
recorded, and the eects will
be applied when the loop is
played back.
This is a convenient way
to adjust the eects, or to
compare the sound of dierent
patches.
[6] REC MODE
MONO
The phrase will be recorded
in monaural (maximum 38
seconds).
STEREO The phrase will be recorded in
stereo (maximum 19 seconds).
[7] PLAY LEVEL 0–120 Species the phrase playback
volume.
[8] PEDAL FUNC
OFF
Phrase Loop will not operate
even if you press the [PHRASE
LOOP] pedal.
PHRASE LOOP
You can use the [PHRASE
LOOP] pedal to switch Phrase
Loop on/o or to record.
4. Press the [EXIT] button to return to the Play screen.