Boss Audio Systems GT-100 Using Send/Return

Creating Sounds (Eects)

29

Quick Guide Overview Outputting Sound Eects Saving Pedal Settings System MIDI/USB Appendices

Using Send/Return

You can connect an external eects processor between the SEND

jack and RETURN jack, and use it as one of the GT-100’s eects

processors.

The sound that is input to SEND/RETURN within the eect chain will

be output to the SEND jack. The sound that is input via the RETURN

jack will be input to SEND/RETURN within the eect chain.

1. Press the [EFFECT ] button.

2. Use knob [4] to select “SEND/RETURN.”

3. Use knobs [5]–[8] to make settings.

Con-

troller Parameter Value Explanation

[5] MODE

NORMAL

The input to SEND/RETURN within the

eect chain will be output to the SEND

jack, and the input from the RETURN jack

will be output following SEND/RETURN.

Use this setting if you want to connect an

external eects processor in series within

the GT-100’s eect chain.

SEND RETURN

DIRECT

MIX

The input to SEND/RETURN within the

eect chain will be output to the SEND

jack, and the input from the RETURN

jack and the input to SEND/RETURN (the

direct sound) will be mixed and output

following SEND/RETURN.

Use this when you want to mix the

GT-100’s eects sounds together with the

sound with the external eects device

applied to it.

SEND RETURN

BRANCH

OUT

The input to SEND/RETURN within the

eect chain will be output to the SEND

jack. The input from the RETURN jack will

be ignored.

For example, by placing SEND/RETURN in

the GT-100’s eect chain in front of reverb

or delay, this allows you to use the SEND

jack as a direct out.

SEND

[7] SEND

LEVEL 0–200 Adjusts the volume of the output to the

external eects device.

[8] RETURN

LEVEL 0–200 Adjusts the volume of the input from the

external eects device.

Contents

Main About WARNING and CAUTION Notices About the Symbols ALWAYS OBSERVE THE FOLLOWING USING THE UNIT SAFELY USING THE UNIT SAFELY WARNING Turn o the unit if an abnormality or malfunction occurs Adults must provide supervision in places where children are present Do not drop or subject to strong impact IMPORTANT NOTES Power Supply Placement Maintenance Repairs and Data Main Features Contents Contents Quick Guide 1. 2. 3. 1 2 1 3 Connect your guitar and amp. Turn on the power Convenient tuner function 4 1. 2. 3. using. 4. Quick Guide 2 Selecting patches in the same bank Selecting patches from a dierent bank What is a Patch? Bank and number indication Using the pedals to control the eects Switching the Play screen What the eight knobs do Press the [ACCEL/CTL] pedal Depress the [EXP] pedal (press down on the toe) 3 Select an item Use to select an item shown in the left display. Use to edit the values shown in the right display. Eect Editing: Saving a Patch Types of saving Assigning a name Enter EZ (Easy) Tone mode Select the type of editing Editing: EZ (Easy) Tone For PATCH CREATE For AMP CUSTOM or OD/DS CUSTOM Choose Amp or Drive Adjust the amount of distortion Use to select the type. Use to switch screens. Use to adjust the distortion. Finish editing Editing: Editing the Eects Edit the values Finish editing Select the eect that you want to edit Use to select OD/DS. Advanced: Manual Mode What Is Manual Mode? 7 Record Stop Clear/Exit Loop playback Overdub Advanced: Accel Eect Select the eect Exit the settings Enter Eect Edit mode Select the ACCEL eect Panel Descriptions Front Panel Display [EXP] pedal Panel Descriptions About the Play Screen The screen that appears after you turn on the power is called the Play screen. Icons in the display Left display Right display Types of Play screens Rear Panel (Connections) Panel Descriptions MIDI jack USB port DC IN jack [POWER] switch Outputting Sounds Switching the Unit On and O Switching the Unit On 1. 2. Switching the Unit O Using the Metronome 1. 2. 3. Play screen. Using the Pedal to Select the Patch 1. 2. Using the Knobs to Select a Patch Creating Sounds (Eects) Setting the Eects Use the left and right displays and knobs [1]--[8] to edit the settings of the internal eects. Specifying the Divider and Mixer Modes Divider settings Using Amp Control 2. 3. 4. Creating Sounds (Eects) Using Send/Return 2. 3. Saving a Tone Saving a Patch (PATCH WRITE) 2. 3. Exchanging Patches (PATCH EXCHANGE) Storing Settings by Eect (Quick Setting Write) 2. 3. to store. 4. 5. Phrase Loop Play Setting Phrase Loop Setting procedure 2. 3. Pedal Settings (Control/Expression) Using Pedals to Control the Parameters want to specify. Assigning the ACCEL/CTL, EXP SW, SUB CTL1, and SUB CTL2 Functions 2. Assigning the EXP and SUB EXP Pedal Functions 2. want to specify. 3. Assigning the [1][8] Knob Functions in the Play Screen Switching Settings with the Number Pedals Adjusting the [EXP] pedal Setting Each Pedal Functions to Individual Patches (Assign) 2. 3. About the Range of a Targets Change About the Range of a Controllers Change Virtual expression pedal system (Internal Pedal / Wave Pedal) Internal Pedal Wave Pedal Input Level Input Level Making Global Settings (System Settings) Settings that are shared by the entire GT-100 are called system settings. For details, refer to Editing: Basic Operation (p. 12). List of Settings Specifying the Output Device Youre Using (OUTPUT SELECT) Making the PLAY OPTION Settings Assigning the [1][8] Knob Functions in the Play Screen Specifying Whether Settings Will Be Shared by All Patches Adjusting the Contrast (Brightness) of the LCD Screen Adjusting the [EXP] pedal Auto O Settings NOTE Restoring the Factory Settings (Factory Reset) USB-Related Settings Here you can make USB-related settings for when the GT-100 is connected to a computer via USB. USB audio ow For details on USB connection, refer to Using the GT-100 Connected to a Computer Via USB (p. 49). USB MIDI-Related Settings For details on MIDI, refer to Using the GT-100 with External MIDI Devices Connected (p. 47). MIDI SETTING Setting the MIDI Receive Channel Setting the MIDI Omni Mode Selecting the Connector That Will Receive MIDI Messages Sending Program Change Messages Enabling/Disabling the Program Change Map Settings (MIDI Map Select) Sending [PHRASE LOOP] Pedal Operations as Control Change Messages Sending [ACCEL/CTL] Pedal Operations as Control Change Messages Sending External Expression pedal Operations as Control Change Messages MIDI PROGRAM CHG MAP BANK 03 Setting the Program Change Map MIDI BULK DUMP Transmitting Data to an External MIDI Device Using the GT-100 with External MIDI Devices Connected What Can You Do with MIDI? Operating From the GT-100 Outputting Program Change Messages Outputting Control Change Messages Transmitting Data to an External MIDI Device (Bulk Dump) Making Connections When Transmitting Data to Another GT-100 Transmitting the Data 2. Using the GT-100 Connected to a Computer Via USB Before Connecting with USB Installing the USB Driver What is a USB Driver? Exchanging MIDI Messages between the Computer and the GT-100 Restoring the Factory Settings (Factory Reset) 2. 3. returned to their factory-set state. 4. Appendices GT-100 Eects Guide GT-100 Eects List How to obtain a PDF of the Parameter Guide OD/DS Type List This is a list of distortion types that can be selected for OD/DS. Preamp Type List This is a list of the amp types that can be selected for PREAMP. FX1/FX2 Eects List This is a list of the eects that can be selected for FX1/FX2. GT-100 Preset Patch List Page Page Page Page Page Signal Flow ACC Troubleshooting Error Messages Main Specications BOSS GT-100: Amp Eects Processor Index A B C D FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT WARNING For C.A. US (Proposition 65) DECLARATION OF CONFORMITY Compliance Information Statement Page Information distributor in your country as shown below. As of Feb. 1, 2011 (ROLAND) AFRICA EGYPT