Manuals / Bostitch / Power Tools / Nail Gun

Bostitch F21PL2, F28WW, F33PTSM manual Operation, Lubrication

Models: F21PL F33PT F33PTSM F21PL2 F28WW

1 40
Download 40 pages 44.8 Kb
Page 5
Image 5

OPERATION (continued)

MODEL IDENTIFICATION:

Refer to OperationInstructions on page 9 before proceedingto use this tool.

SEQUENTIAL TRIP

CONTACTTRIP

Identified by:

Identifiedby:

GRAYTRIGGER

BLACKTRIGGER

 

 

 

 

 

 

 

 

AIR SUPPLYAND CONNECTIONS

Do not use oxygen, combustiblegases, or bottled gases as a power source for this tool as tool may explode, possiblycausing injury.

FITTINGS:

Install a male plugon the toolwhich is free flowingand whichwillrelease air pressure fromthe toolwhendisconnected from the supply source.

HOSES:

Air hosesshouldhave a minimumof 150 p.s.i. (10.6 kg/cm2) working pressure rating or 150 percent of the maximum pressure that could be produced in the air system. The supply hose should contain a fitting that will provide “quick disconnecting” from the male plug on the tool.

SUPPLYSOURCE:

Use only clean regulatedcompressed air as a powersource for this tool. NEVER USE OXYGEN,COMBUSTIBLE

GASES, OR BOTTLED GASES,AS A POWERSOURCE FORTHISTOOL ASTOOL MAYEXPLODE.

REGULATOR:

A pressureregulator with an operating pressureof 0 - 125 p.s.i. (0 - 8.79 KG/CM2) is required to control the operating pressure for safeoperationof this tool. Do not connectthis tool to air pressure whichcan potentially exceed200 p.s.i. (14 KG/CM2) as tool may fracture or burst, possibly causing injury.

OPERATING PRESSURE:

Do not exceedrecommendedmaximum operatingpressureas tool wear will be greatlyincreased.The air supply must be capableof maintainingthe operating pressureat the tool. Pressure drops in the air supply can reduce the tool’s driving power.Refer to “TOOL SPECIFICATIONS”for setting the correct operating pressure for the tool.

FILTER:

Dirt and water in the air supplyare major causes of wear in pneumatic tools. A filter will help to get the best performance and minimum wear from the tool.The filtermust have adequate flow capacity for the specific installation.The filterhas to be kept clean to be effective in providingcleancompressed airto thetool. Consult themanufacturer’s instructionson proper maintenance of your filter.A dirty and clogged filterwill cause a pressuredrop which will reducethe tool’s performance.

LUBRICATION

Frequent, but not excessive, lubrication is required for best performance. Use BOSTITCHAir ToolLubricant,Mobil Velocite #10,or equivalent. Do not use detergentoil or additivesas theselubricantswillcauseacceleratedwearto the seals and bumpers in the tool, resulting in poor tool performance and frequent tool maintenance. Only a few dropsof oil at a time is necessary.Toomuch oil will only collectinsidethe tool and will be noticeablein the exhaust cycle.

COLD WEATHER OPERATION:

Forcoldweatheroperation, nearand belowfreezing,the moisture in the air line mayfreezeand preventtooloperation. We recommendthe use of BOSTITCH winterformulaair tool lubricantor permanentantifreeze(ethylene glycol) as a cold weather lubricant.

CAUTION: Do not store tools in a cold weather environment to prevent frost or ice formation on the tools operating valves and mechanisms that could cause tool failure.

NOTE:Some commercial air line drying liquids are harmful to “O”-rings and seals – do not use these low temperature air dryers without checking compatibility.

5

Page 4 Page 6
Page 5
Image 5
Bostitch F21PL2, F28WW, F33PTSM manual Operation, Lubrication
Page 4 Page 6

F21PL, F33PT, F33PTSM, F21PL2, F28WW specifications

Bostitch is renowned for its high-quality nailers and fasteners, and its range of products including the F28WW, F21PL2, F33PTSM, F33PT, and F21PL showcases innovations in construction and woodworking. Each of these models is designed to cater to specific needs, making them essential tools for professionals and DIY enthusiasts alike.

The Bostitch F28WW is a lightweight framing nailer that is particularly well-suited for wall framing and sheathing applications. It features a unique flush nose design that allows users to navigate tight spaces with ease. Its adjustable depth control ensures precise nail placement, while the tool-free jam clearance saves valuable time in the event of a jam.

Next is the F21PL2, which combines the functions of both a framing nailer and a brad nailer. This versatility is ideal for those handling diverse projects, from framing walls to finishing touches. The F21PL2 is equipped with a Pushbutton Depth Adjustment feature, which allows users to quickly set the nail depth according to materials, ensuring high-quality finishes.

The Bostitch F33PTSM is designed for trim work, offering a precision that makes it a go-to tool for trim carpenters. Its SmartPoint technology provides accurate nail placement and eliminates the need for the user to press the nailer against the workpiece before firing. This feature, coupled with its tool-free depth adjustment, allows for flexibility and precision.

Similarly, the F33PT is well-regarded for its lightweight design and superior maneuverability. It utilizes a Tool-Free Depth Adjustment feature that enables users to quickly adapt the nail depth for better results on different materials. Its durable construction ensures longevity and reliability on the job site.

Rounding out the lineup is the F21PL, which focuses primarily on framing and metal connector applications. This nailer is known for its high-efficiency performance, featuring a patented anti-dry fire mechanism that prevents accidental firing when nails are not loaded. The F21PL is also compatible with a wide range of fasteners, enhancing its adaptability for various tasks.

Together, these Bostitch models exemplify the brand's commitment to quality, efficiency, and user-friendly technologies, making them indispensable for construction professionals and hobbyists looking to achieve high standards in their woodworking projects. Their blend of performance-enhancing features and thoughtful designs truly sets Bostitch nailers apart in the market.