Amplifier Troubleshooting Guide
Status LEDs on Amplifier not Lit—Head Unit (Source) Turned “ON”
Verify Remote
Power (B+) connections at amplifier, terminal blocks, and battery are secure Ground (GND) connections at amplifier and vehicle chassis are secure Battery B+ fuse and amplifier fuse are OK
B+ at battery and B+ at amplifier have proper voltage
Status LEDs Lit, no Output from
Verify
Engine Noise from Speaker(s)
Turn source “OFF” and disconnect RCA cables at amplifier
If noise stops, check equipment and cables leading to amplifier
Verify RCA cables are of good quality with no breakage to internal shields
RCA cables from source to amplifier are not run alongside power
Amplifier Output
Verify Source output to amplifier is not distorted
Amplifier input sensitivity is correctly adjusted
Amplifier Shutting Down, Red Blinking and Orange LEDs
Verify Amplifier is mounted with adequate air circulation around vents Amplifier does not have obstructions blocking back or side panel vents Amplifier is not mounted under carpet
Speakers meet correct impedance for application (mono or stereo hookup)
Amplifier not Turning “ON”, Orange LED
Verify Speaker crossover is not defective
Amplifier not Turning And Both LED (s)
| Internal fuse needs to be replaced |
Verify | Replace fuse with fuse of same value |
Amplifier not Turning “ON”, Orange LED
Amplifier requires service
If Service Seems Necessary
First, contact the dealer from whom you purchased the product, or contact us via
USA and Canada: support@bostona.com
Europe: support@bostona.com
Japan:
Asia/Pacific countries:
We will promptly advise you of what action to take.
Boston Acoustics, Inc. 300 Jubilee Drive, Peabody, MA 01960 USA
T: 978.538.5000 F: 978.538.5100 W: bostonacoustics.com
Boston, Boston GT, Boston Acoustics, and the Boston Acoustics logo are registered trademarks and DualMode and