Bowers & Wilkins manual CWM6 Carton Contents, CWM6 Series Basics CWM663, CWM664, CWM652, Model

1. CWM6 Carton Contents

1

1

1

1

•CWM6 Series speaker assembly (baffle, frame, grille)

•Cut-out template

•Paint mask

•Document pack containing Quick Start Guide and Warranty information

Environmental Information

All Bowers & Wilkins products are

designed to comply with international

directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical

and Electronic Equipment (WEEE). These symbols indicate compliance and that the products must be appropriately recycled or processed in accordance with these directives. Consult your local waste disposal authority for guidance.

2. CWM6 Series Basics

CWM663, CWM664

183mm (7.2in)

279mm (11in)

279mm (11in)

95mm (3.7in)

CWM6 Series wall mount speakers comprise a baffle carrying the speaker drivers and crossover, an integrated frame and front flange, and a magnetically secured grille. The frame is connected via side mounted terminals to the speaker cables, with the baffle connecting automatically as it is inserted in the frame.

CWM6 Series speakers require wall aperture dimensions described in the following table:

Model	Aperture Height	Aperture Width
CWM652	228mm (9 in)	153mm (6 in)
CWM663	279mm (11 in)	183mm (7.2 in)
CWM664	279mm (11 in)	183mm (7.2 in)

CWM652

153mm (6in)

228mm (9in)

228mm (9in)

95mm (3.7in)

All CWM6 Series speakers require clear depth behind the sheetrock (plasterboard) of 90mm (3.55 in). The diagrams above illustrate these dimensions.

Note: If CWM6 Series speakers are to be installed in “new build” projects, pre-mount kits and back boxes are available. Contact your local Bowers & Wilkins retailer for more information.

Before installing CWM6 Series speakers you should ensure that the wall locations chosen are free of obstructions such as pipe work, ducting or wiring that will interfere with the installation. In existing dry-wall construction, use a stud-finding tool to help you map the wall construction and a pipe detector to scan the proposed installation locations.

3