Using Your Machine
Folding & Moving
Your Bowflex
Folding and moving your Bowflex is easy. Follow the simple
1
steps below to fold your Bowflex. Once it’s folded, simply tilt the machine back on its transport wheels and roll it to any location
1.Remove the leg attachment from the Bowflex, if attached.
2.Lock the seat and bench into place using the spring lock seat pin.
3.Hook cables into cable storage loops.
4.Bind the Power Rods® with the rod binding strap.
5. Remove the threaded knob on the platform. | 3 |
6.Tilt the bench up to the Power Rods®.
7.Screw the threaded knob into the end of the sliding seat rail.
Maintenance & Care Of Your Bowflex:
Your Bowflex requires very little maintenance. To keep your Bowflex in top condition check all fasteners and rod caps before each workout and tighten as needed.
Clean the bench with a non abrasive cleaner after each use. This will keep it looking new. Any non abrasive household
cleaner or soap works well. Many automotive interior cleaners 5 make surfaces too “slick” and should not be used.
If you have any questions regarding maintenance please call our customer service department at
2
4
6
8
7