TURNING ON THE POWER
Precautions
Connect all devices to be used to the projector prior to turning on the power. 8 ～ 12
WARNING When the power is ON, a strong light is emitted. Do not look into the lens.
|
|
| STANDBY/ON |
VIDEO | RGB | SEARCH |
|
ASPECT |
| AUTO | BLANK |
MAGNIFY | HOME | PAGE UP | VOLUME |
ON |
|
|
|
| END | PAGE DOWN | MUTE |
OFF |
|
|
|
FREEZEKEYSTONE
Control panel
LANP 
TENP 
POWER 
STANDBY/ON INPUT KEYSTONE RESET
1 | Make sure that the power cord is firmly and |
| correctly connected to the projector and outlet |
| 3 |
|
|
2 | Turn on the projector's power |
Set the power switch to [ ] (ON). The projector will go |
to STANDBY mode and the POWER indicator will light to solid orange.
power switch
POWER indicator
NDB
INP
KEYSTONE
RESET
KE | YSTONE | PO |
| TE | LANP |
| WER | NP | |||
|
| RESET |
|
| |
NOTE Turn the power on/off in right order.
•Power on the projector before the computer or video tape recorder.
•Power off the projector after the computer or video tape recorder.
3 Press the STANDBY/ON button (control panel or remote control)
•The projector begins warming up and the POWER indicator blinks green.
| • The POWER indicator stops blinking | STANDBY/ON |
|
| |
| and lights to solid green once the |
|
| projector's power is completely on. |
|
4 | Remove the lens cap |
|
The picture is projected. |
|
14
