B. BEFORE OPERATING: Smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electric switch; do not use any phone in your building.
C. Use only your hand to operate the remote control keypad. Never use tools. If the remote keypad doesn’t work, do not try to repair it, call a qualified service technician. Forced or improper repair may result in a fire or explosion.
D. Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control, which has been under water.
FOR YOUR SAFETY READ BEFORE OPERATING
WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.
A. This appliance does not have a pilot. It is equipped with a direct ignition device, which automatically lights the burner. Do not try to light the burner by hand.
LIGHTING INSTRUCTIONS

• Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

OPERATING INSTRUCTIONS

1.

STOP! Read the safety information

6.

Wait (5) minutes to clear out any gas. If you

 

above before proceeding.

 

then smell gas, STOP! Follow “B” in the safety

 

 

 

information above on this label. If you don’t smell

 

 

 

gas, go to next step.

 

2.

Set the thermostat to the lowest

7.

Turn the manual valve located at the gas inlet of

 

setting.

 

appliance counterclockwise

to “ON” (see

 

 

 

Figure 9).

 

3.

Turn off all power to the electrical

8.

Turn on all electric power to the appliance.

 

appliance.

 

 

 

4.

This appliance does not have a pilot.

9.

Set the thermostat to desired setting.

 

It is equipped with a direct ignition

10.

If the appliance will not operate, Follow the

 

device, which automatically lights

 

the burner. Do not try to light the

 

instructions “To Turn Off Gas To Appliance” and

 

burner by hand.

 

call your service technician or gas supplier.

5.Turn the manual valve located at the gas inlet of the appliance clockwise to “OFF” (see Figure 9).

TO TURN OFF GAS TO THE APPLIANCE

1. Set the thermostat to the lowest

3. Turn the manual valve at gas inlet of appliance

setting.

clockwise

to “OFF” (see Figure 9).

2.Turn off all electric power to the appliance if service is to be performed.

Manual Gas Valve (Fig 9)

29

Page 28 Page 30
Page 29
Image 29
Bradford-White Corp IGE-199C Series, IGE-199R Series To Turn OFF GAS to the Appliance, Manual Gas Valve Fig
Page 28 Page 30

IGE-199R Series, IGE-199C Series specifications

Bradford-White Corporation is a renowned manufacturer in the water heating industry, providing high-quality solutions for residential and commercial applications. Among its innovative line of products, the IGE-199R and IGE-199C Series stand out for their exceptional performance and efficiency in delivering hot water.

The IGE-199R and IGE-199C Series are powered by advanced technology designed to meet the demands of both modern homes and commercial settings. They feature advanced tankless water heating systems that offer continuous hot water on demand, eliminating the need for bulky storage tanks. This not only saves space but also enhances energy efficiency, as hot water is produced only when needed.

One of the key features of the IGE-199R and IGE-199C is their Energy Star certification, attesting to their high efficiency. These units utilize a powerful, high-efficiency condensing heat exchanger, which maximizes heat transfer while minimizing energy loss. The design facilitates a uniform and solid flow rate, ensuring that multiple outlets can be served simultaneously without compromising performance.

Both series also incorporate cutting-edge technology, such as modulating gas burners that adjust the heat output to match the hot water demand. This means that these units can efficiently operate at varying levels of energy consumption, ultimately resulting in lower utility bills for the consumer. Additionally, the units are equipped with an integrated control system that monitors system performance and provides digital diagnostics, making maintenance and troubleshooting straightforward.

Safety features are also paramount in the design of the IGE-199R and IGE-199C models. The units are outfitted with a range of safety sensors, including temperature and pressure relief valves, ensuring safe operation and preventing potential hazards. Furthermore, the innovative venting options allow for flexible installation, even in tight spaces, without compromising safety or efficiency.

The IGE-199R and IGE-199C Series are engineered to be user-friendly, offering a clear interface for easy operation and monitoring. Their robust construction ensures durability and reliability, making them an excellent choice for long-term investment in hot water solutions.

In summary, Bradford-White's IGE-199R and IGE-199C Series deliver exceptional quality and performance in tankless water heating. With their focus on energy efficiency, advanced technologies, and safety features, these units provide a reliable and effective solution for meeting the hot water needs of any household or commercial space.
Top Page Image Contents