![](/images/new-backgrounds/1063725/6372517x1.webp)
| Terreon® 54" |
Installation Instructions | TDB3104, WF3204 |
Installation Instructions continued . . .
Step 2: Bowl/pedestal mounting and assembly
1.Position pedestal at desired location and mark the position of the (2) pedestal wall mounting locations and (2) pedestal floor mounting locations (see Figure 5b).
TAS Option:
Place TAS spacer on floor over the mounting holes. Place pedestal on top of the spacer.
2.Secure pedestal to wall and floor with suitable fasteners, 1/2" anchors and 1/2" bolts (supplied by installer) (see Figure 5b for floor and wall mounting locations).
3.Using two to three people, carefully lift bowl onto pedestal (see Figure 5b).
4.Position bowl so that threaded rods in bowl mate with slotted holes in pedestal (see Figure 5b).
5.Using 1/4" wing nuts and washers, secure bowl to pedestal, three places (see Figure 5b).
CAUTION: BOWL SURFACE IS VERY SMOOTH. APPROXIMATE WEIGHT OF BOWL IS 146 LBS. (model TDB3104), 136 lbs. (model WF3204) or 101 lbs. (TDB3104/JUV). HANDLE WITH CARE!
TOP VIEW
DRAIN
Figure 5a
FRONT VIEW
PLACE HANDS
HERE WHEN
LIFTING BOWL
DRAIN
WALL MOUNTING
LOCATIONS
Figure 5b
PLACE HANDS
HERE WHEN
LIFTING BOWL
THREADED ROD (Secured by 1/4" wing nut and washer)
PEDESTAL
FLOOR MOUNTING LOCATIONS
Bradley Corporation • | 2/8/07 | 9 |