Braun L955 manual Latch Roll Stops

Pre-Lift Operation Notes and Details

Outboard Roll Stop: When the platform lowers fully to ground level, the roll stop cylinder compression spring automati- cally unfolds (rotates) the roll stop to the ramp position (fully unfolded). See photos A and B. Although the outboard roll stop is lift-powered, the activation of

the roll stop is controlled by the lift operator. Activating either DOWN switch unfolds the roll stop. The roll stop is cylinder- powered to automatically fold (rotate) to the vertical position when the UP switch is activated (roll stop raises before platform raises).

Side Entry Roll Stop: When the platform lowers fully to ground level, the spring-loaded side entry roll stop unfolds (rotates) to the ramp position simultaneously with the out- board roll stop (when DOWN switch is activated). See photos A and B. The belt and chain

Fully-Unfolded (Ramp position) Roll Stops

B	Disengaged	Fully-Folded
	Roll Stop	(Up-vertical)

Latch Roll Stops

L955U: The roll stop latch is on opposite side of the platform.

Note: The platform must raise approximately two inches before the latch engages fully.

Fully-Engaged Roll Stop Latch

C

2"

Latch Foot

Page 17