WARNING
Decals and Antiskid
Decals
Replace missing, worn or illegible decals. Failure to do so may result in serious bodily injury and/or property damage.
The lift is only as safe as | 17866 |
the operator. Replace any missing, worn or illegible decals! Part numbers are provided for decals. Inspect your lift for missing, worn or illegible decals. Call
24069
WARNING
•Read manual before operating lift.
•Load and unload on level surface only.
•Engage vehicle parking brake before operating lift.
•Provide adequate clearance outside of vehicle to accommodate lift.
•Do not operate lift if you suspect lift damage, wear or any abnormal condition.
•Keep operator and bystanders clear of area in which lift operates.
Whenever a wheelchair passenger is on the platform, the:
•Passenger must face outward
•Wheelchair brakes must be locked
•Roll stop must be up Failure to follow these rules may result in serious bodily injury and/or property damage.
12375
Parking Courtesy
Requested
"Providing Access to the World"
International Corporate Hdqrs: P.O. Box 310 | Winamac, IN 46996 USA | ||
(219) | FAX: (219) | ||
Fairfield, NJ USA | Clearwater, FL USA | Huntington Beach, CA USA | |
Oslo, Norway | Kitchener, Ontario Can. | Rocklea, Queensland Aust. | |
12375
Note: Clean surfaces as detailed on opposite page before posting decals.
25675
WARNING
Lift installation and servicing prohibited by anyone who has not been certified by The Braun Corporation Sales and Service School. Certified service technicians should call
25675
26701 |
UP |
107 |
62 |
DOWN |
22249
WARNING
Contact The Braun Corporation before adjusting hydraulic pressure relief valve. Failure to do so may result in serious bodily
injury and/or
property damage.
22249
24242
Microswitch Adjustment Instructions
Unfold/Down (Top) Microswitch
Turn adjustment bolt counterclockwise to stop platform unfold function sooner. Turn adjustment bolt clockwise to allow platform to unfold further.
Up/Fold (Bottom) Microswitch
Turn adjustment bolt clockwise to stop platform raise function sooner. Turn adjustment bolt counterclockwise to allow
platform to raise further. | 24242 |
25652
25652
LIFT OPERATING INSTRUCTIONS
TO OPEN DOOR(S)
Press 
OPEN switch until door(s) are fully open.
TO UNFOLD PLATFORM (OUT):
Press 
OUT switch until platform stops (reaches floor level).
TO UNLOAD PASSENGER:
1.Load passenger onto platform facing outward and lock wheelchair brakes.
2.Press 
DOWN switch until platform stops and roll stop unfolds fully.
3.Unlock wheelchair brakes and unload passenger from platform.
TO LOAD PASSENGER:
1.Load passenger onto platform facing outward and lock wheelchair brakes.
2.Press 
UP switch until platform stops (reaches floor level).
3.Unlock wheelchair brakes and unload passenger from platform.
TO FOLD PLATFORM (IN):
Press 
IN switch until platform stops.
TO CLOSE DOOR(S):
Press 
CLOSE switch until door(s) are fully closed.
24069
27146
MANUAL
OPERATION
EN | CL |
O | |
P | S |
O | E |
OPEN
CLOSE
Using hand pump handle:
TO UNFOLD PLATFORM (OUT):
1.Close hand pump valve (turn clockwise).
2.Insert handle in pump and stroke until platform folds fully (stops).
3.Open hand pump valve (turn counterclockwise) until platform reaches floor level. Open 1/2 turn only.
4.Close hand pump valve (turn clockwise).
DOWN (TO LOWER):
Open hand pump valve (turn counterclockwise). Open 1/2 turn only.
UP (TO RAISE):
1.Close hand pump valve (turn clockwise).
2.Insert handle in pump and stroke until platform reaches floor level.
TO FOLD PLATFORM (IN):
Insert handle in pump and stroke.
Close valve before operating electric pump.
27146
Page 34
