Breville BES840 INSTALLING/REPLACING Filter in the Water Tank, Cleaning Cycle, Decalcifying

PAC geRE header& CLEANING.....

INSTALLING/REPLACING THE

FILTER IN THE WATER TANK

1 2 3 4 5 6

PAC geRE header& CLEANING.....

CLEANING CYCLE

The espresso machine features an in-built cleaning cycle which should be carried out periodically. The CLEAN ME light will automatically illuminate to indicate when a cleaning cycle is required.

			REPLACEMENT DUE
Soak the water filter for	Rinse filter & mesh	Assemble	Set date 2 months ahead Install filter in water tank Insert & lock water tank
5 minutes

1 2

CLEAN ME

3	4	ESPRESSO	5	6
		MACHINE	INSERT	LOCK
		CLEANING
		TABLETS
				POWER

The water filter provided helps to prevent scale build up which over time can affect the performance of your machine, potentially causing blockages and heating, problems

Replacing the water filter every two months will reduce the need to de-scale the machine.

If you live in a hard water area, we

PORTAFILTER CLEANING

Periodically run water through the machine with the portafilter in place, but without any ground coffee, to rinse out any residual coffee particles.

Cleaning required	Empty drip tray and fill
	water tank

7HOLD TOGETHER 3 SEC

POWER

Insert cleaning disc & filter	Place tablet on top	Insert & lock portafilter		Turn machine off
basket into portafilter		into Group Head
8	9	10		11	INSERT LOCK	12
		INSERT	LOCK			AUSTRALIA
						1300 139 798
						NEW ZEALAND
		?	?			0800 273 845
						HELP!
5 MIN

recommend you change the water filter more frequently.

While pressing the POWER button down, press & hold	Wait 5 minutes to finish	Rinse the filter basket &	No espresso extraction?	See Trouble Shooting Guide	Call Service Centre for
the 1 CUP & 2 CUP buttons		portafilter before use		Page 33.	cleaning tablets

Replacing The Water Filter

•Remove the filter from the plastic bag, and soak in a cup of water for 5 minutes

•Rinse the filter under cold running water for 5 seconds

•Wash the stainless steel mesh in the plastic filter compartment with water and assemble

•Set the date dial 2 months ahead

•To install, push down to lock into place

The water filter can be removed

from the water tank during operation if not required.

NOTE

For replacement water filters contact Breville Customer Service Centre on 1300 139 798 (Australia) or

0800 273 845 (New Zealand).

CLEANING CYCLE PROCESS GUIDE

If cleaning is required, simply follow the steps below and refer to the Machine Cleaning Cycle guide.

1.Insert the cleaning disc into the one or two cup filter basket.

2.Place the filter basket into the portafilter.

3.Put 1 cleaning tablet into the filter.

4.Lock the portafilter into the group head.

5.Turn the machine OFF.

6.Simultaneously press and hold the 1 CUP, 2 CUP and POWER button for 3 seconds.

7.The cleaning cycle will commence and last for approximately 5 minutes. Once complete, 3 beeps will sound. Remove the portafilter and ensure the tablet has completely dissolved.

If the tablet has not dissolved, repeat steps 5 to 7 until tablet has dissolved.

DECALCIFYING

After regular use, hard water can cause mineral build up in and on many of the inner functioning components, reducing the brewing flow, power of the machine, and affecting the quality of coffee.

We advise decalcifying the machine on a regular basis (every 2-3 months) using a mixture of white vinegar and water.

Follow the instructions provided, or use the following as a guide:

Solution for decalcifying

Diluted Solution (for softer water)

•1 part white vinegar

•2 parts cold tap water

22 23