PAC geRE header& CLEANING.....

CLEANING / UNBLOCKING THE FILTERS, PORTAFILTER AND GROUP HEAD

Periodically run water through the machine with the portafilter in place, but without any ground coffee, to rinse out any residual coffee particles.

1

2

3

4

 

5

6

 

 

 

INSERT

LOCK

 

 

 

 

 

 

 

PRESS & HOLD

 

Knock grinds out

Clean filter basket

Place filter basket into

Insert & lock portafilter

Flush water

Use cleaning tool to unblock

 

 

portafilter

into Group Head

 

 

Repeat steps C1-C2

PAC geRE header& CLEANING.....

WARNING

Do not immerse power cord, power plug or appliance in water or any other liquid. The water tank should never be removed or completely emptied during decalcifying.

Should the fine holes in the filters become blocked follow the following steps:

1.Place the filter into the portafilter. Run water through the machine with the filter and portafilter, without any ground coffee, in place.

2.The fine pin on the cleaning tool can be used to clear the filter basket holes.

3.To clean the Single Wall filters simply run water through the portafilter using the manual pour function by holding down the 1 CUP button.

4.For a thorough clean of the filters, run a cleaning cycle of the machine with the portafilter and filter in place

Remove grill and EMPTY ME! indicator from the drip tray. Wash the drip tray with warm soapy water, using a non-abrasive washing liquid, rinse and dry thoroughly. The EMPTY ME! indicator can be removed from the drip tray by pulling upwards to release the side latches.

The drip tray base and cover are dishwasher safe.

CLEANING THE STORAGE TRAY

The storage tray can be removed after the drip tray is removed then cleaned with

a soft, damp cloth (do not use abrasive cleansers, pads or cloths which can scratch the surface).

CLEANING THE OUTER HOUSING / CUP WARMING PLATE

The outer housing and tray warming plate can be cleaned with a soft, damp cloth. Then polish with a soft, dry cloth.

Do not use abrasive cleansers, pads or cloths which can scratch the surface.

CLEANING THE DRIP TRAY

The drip tray should be removed, emptied and cleaned at regular intervals, particularly when the drip tray full indicator is showing EMPTY ME!.

STORING YOUR MACHINE

Before storing, press the POWER button to off, turn the STEAM/HOT WATER dial to STANDBY switch Off at the power outlet and unplug.

Insert all accessories into position or into the storage tray.

Store upright. Do not place anything on top.

26

 

27

 

 

 

Page 15
Image 15
Breville BES840 brochure Cleaning the Storage Tray, Cleaning the Outer Housing / CUP Warming Plate, Cleaning the Drip Tray