CARE & CLEANING
CARE & CLEANING
REPLACING THE WATER FILTER
1 | 2 | 3 | 4 | 5 | 6 |
|
|
| REPLACEMENT DUE |
|
|
Soak water filter for 5 mins | Rinse water filter & mesh | Place filter into filter holder | Set date 2 months ahead | Install filter in water tank | Insert & lock water tank |
The provided water filter helps prevent scale
If you live in a hard water area, we recommend you change the water filter more frequently.
•Remove the new water filter from the plastic bag.
•Soak the new water filter in a cup of water for 5 minutes, then rinse under cold running water.
•Wash the water filter holder with cold water, taking specific care to rinse the stainless steel mesh.
•Insert the new water filter into the two parts of the water filter holder.
•Set Date Dial 2 months ahead.
•To install the assembled water filter holder into the water tank, align the base of the water filter holder with the adapter inside the water tank. Push down to lock into place.
•Slide the water tank back into position at the back of the machine, ensuring to push down completely to lock into place.
The water filter should be removed if using filtered or bottled water.
NOTE
To purchase water filters contact Breville Consumer Support.
CLEANING CYCLE
The CLEAN ME light will illuminate when a cleaning cycle is required. This is a
1.Insert the 1 CUP filter basket into the portafilter, followed by the supplied cleaning disc, followed by 1 cleaning tablet.
2.Lock the portafilter into the group head.
3.Place a large container beneath the group head.
4.Ensure the water tank is filled with cold water and the drip tray is empty.
5.Press the POWER button to turn the machine Off.
6.While pressing the 1 CUP and
2 CUP buttons, simultaneously press the POWER button. Hold all
3 buttons together for 10 seconds.
25
