Breville BFP100 Handy hints for best results

Handy hints for best results

continued

Problem Solution

Motordoesn’t start or blade doesn’t rotate · Check that the processing bowl and lid are securely locked into place.

·Check thatthe release lever is locked onto the processing lid.

· Check the ON/OFF switchis pressed to ON.

· Check thatthe power plug is securely inserted into the power

outletand switched ON.

·Be sureto press only one function control button at a time.

Foodis unevenly chopped Either toomuch food is being chopped at one time or the pieces

arenot small enough. Try cutting food into smaller pieces of even

sizeand processing a smaller amount per batch. For best results the

foodshould be chopped into pieces no larger than 2cm.

Foodis chopped too fine or is watery The food is over processed. Use briefpulses or process for a shorter

time using the chop function.

Foodcollects on processing bowlcover or side of bowl Processing too much food. Turn the Mini Wizz off. When the blade

stopsrotating, remove the cover and clean the bowl and cover with

a spatula.Reduce quantity of food to be processed.

Foodsticks to blade Processingtoo much food. Turn the Mini Wizz off. When the blade

stopsrotating, remove the cover. Carefully remove the blade.

Removethe food from the blade with a spatula, reduce quantity

offood and continue processing.

1. Turn the Mini Wizz to OFF at the ON/OFF switch,

switch the power off at the poweroutlet and

unplug from the power outlet.

2. Press the button on the rear column of the motor

base to unlock the release leverfrom the

processing lid.

3. Turn the processing lid anticlockwise until it

unlocks and pull the lid upwards to remove.

4. Carefully turn the processing bowl anticlockwise

until it unlocks, then lift the bowl upwards

to remove.

Remove the chopping/mixing blade (or whisk)

from the motor shaft bylifting the blade upwards.