Breville recommends safety first
At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
IMPORTANT SAFEGUARDS FOR YOUR BREVILLE power blENDER
•Carefully read all instructions before operating the Breville Power Blender for the first time and save for future reference.
•Remove and safely discard any packaging material and promotional labels before using the blender for the first time.
•To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this appliance.
•Do not place the blender near the edge of a bench or table during operation. Ensure the surface is level, clean and free of water and other substances. Vibration during operation may cause the appliance to move.
•Do not use the blender on a sink drain board.
•Do not place the blender on or near a hot gas or electric burner, or where it could touch a heated oven.
• Handle the blender and attachments with care
– remember the blades are
•Always ensure the blender is completely assembled before operating. The blender will not operate unless properly assembled.
•Do not use attachments other than those provided with the blender.
•Do not attempt to operate the blender by any method other than those described in this book.
•Always secure the blade assembly onto the blender jug before attaching to the motor base.
•Ensure the speed selection dial is in the off ‘0’ position and the blender is switched off at the power outlet and the power cord is unplugged before attaching the blender jug.
4
•Always operate the blender with the blender jug lid in position.
•Keep fingers, hands, knives and other utensils away from moving blades.
•Do not place hands or fingers into the blender jug unless the motor and blades have come to a complete stop. Ensure the speed selection dial is in the off ‘0’ position and the appliance is switched off at the power outlet and the power cord is unplugged before removing the lid from the blender.
•Ensure the motor and the blades have completely stopped before disassembling. Ensure the speed selection dial is in the off ‘0’ position and the appliance is switched off at the power outlet and the power cord is unplugged from the power outlet before attempting to move the blender, when not in use, if left unattended and before disassembling, cleaning or storing.
•Care should be taken when removing the food from the blender jug by ensuring the motor and the blades have completely stopped before disassembling. Ensure the speed selection dial is turned to the off ‘0’ position, the appliance is switched off at the power outlet and unplugged, before removing the lid from the blender jug. The blender jug should then be lifted from the motor base and the food carefully removed before attempting to remove the blade assembly.
•Do not operate the blender continuously for periods longer than 30 seconds on any setting or if processing a heavy load. None of the recipes in this book are considered a heavy load. If the blender is operated continuously for too long, it should be switched off, unplugged and allowed to cool for 30 minutes before recommencing.
•Do not process hot or boiling liquids – allow liquids to cool before placing into the blender jug.
BLR50_IB_Issue1,10_FA.indd 4 | 9/12/09 2:56 PM |
