Operating Your Breville Power Blender continued
Assembling and attaching the blender jug
1.Place the motor base on a flat, dry surface such as a bench top. Ensure the speed selection dial is in the off ‘0’ position, the appliance is switched off at the power outlet and the power cord is unplugged.
2.Place the blender jug upside down on a flat, dry surface such as a bench top.
3.Hold the blender jug handle and place the silicon seal onto the narrow end of the blender jug then carefully insert the blade assembly.
4.Place the blender jug base over the blade assembly and turn clockwise to secure into position.
5.Turn the assembled blender jug upright and place onto the motor base.
6.Insert the inner measuring cup into the lid, then insert the lid firmly into the top of the blender jug.
NOTE
Ensure lid is placed onto blender jug firmly and the inner measuring cup is in position before operating the blender. Do not operate blender without the lid. Additional ingredients can be added whilst blending by removing the inner measuring cup and placing or pouring ingredients through the middle opening in the lid.
NOTE
Liquids should be placed into the blender jug before solid ingredients, unless specified differently in a recipe.
NOTE
All foods should be cut into cubes (approx.
Using the blender
NOTE
When using the blender for the first time, you may notice an odour coming from the motor. This is normal and will dissipate with use.
1.Ensure the speed selection dial is in the off ‘0’ position. Insert the power cord into a 230/240V power outlet and switch on at the power outlet.
2.Remove the lid and add food and/or liquid into the blender jug.
3.Select the desired speed by turning the speed selection dial clockwise to a speed between 1 (low) and 5 (high). The speed can be changed at any time during the blending process. Turn the speed selection dial
Speed
Speed
Speed 5 (high speed) is suitable for smoothies and cocktails.
ICE (Pulse) can be used for foods that require short bursts of power to process such as herbs, nuts, small vegetables and ice. When using the ICE (Pulse) function, hold the blender lid in place.
NOTE
If any moisture or liquid appears on the motor base, ensure the speed selection dial is in the off ‘0’ position, the appliance is switched off at the power outlet and the power cord is unplugged, remove the blender jug then wipe the spillage immediately with paper towel and dry thoroughly. Ensure the blender jug is correctly assembled before placing back onto the motor body and operating.
NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE BLENDER WHILST THE MOTOR IS RUNNING.
8
BLR50_IB_Issue1,10_FA.indd 8 | 9/12/09 2:56 PM |
