BEFORE FIRST USE
of your Breville
the Big One™
Before first use
Check that cooking plates are clean and free of dust. If necessary, wipe over with a damp cloth. Place the toastie maker on a flat, level surface with the lid in the closed position.
1.Insert power plug into a 230/240V power outlet and turn the power on. The red power ‘ON’ light will illuminate.
2.Allow the toastie maker to preheat until the green ‘READY’ light illuminates.
3.During this time, prepare the toastie by buttering four slices of bread and preparing filling.
4.Place two slices of bread on the plates, buttered sides down. Place filling on top of bread.
5.Place remaining bread on filling, buttered side up.
NOTE
The green ‘READY’ light will cycle on and off during the toasting process indicating that the correct temperature is being maintained.
6.Carefully close the lid and clip handles together. Do not force the lid to close.
7.Toasting should take approximately three minutes. Exact toasting time will be a matter of taste. It will also depend on the type of bread and type of filling used.
8.When the toastie is cooked, remove it with the help of a plastic or wooden spatula. Never use metal tongs or a knife as these can cause damage to the
9.To maintain heat, keep the lid closed until you are ready to toast the next toastie.
NOTE
At all times the lid must be closed. When using the toastie maker for the first time you may notice a fine smoke haze. This is caused by the heating of some of the components. There is no need for concern.
WARNING
Steam will be ejected from between the cooking plates when the lid is closed. Be careful not to make contact with the steam as it may cause burns.
IMPORTANT
Fully unwind power cord from cord storage facility before use.
9
