Breville SLV3100 manual To Attach the Whisk, To detach the whisk, To use the whisk

Models: SLV3100

1 68
Download 68 pages 25.34 Kb
Page 13
Image 13

ASSEMBLY & OPERATION

whisk

TO ATTACH THE WHISK

Remove blending shaft from motor body (follow the instructions on page 10 “To detach the blending shaft”).

Align the top end of the whisk gearbox with the corresponding end of the motor body and push until the whisk ‘clicks’ and locks onto the motor body.

Ensure the whisk gearbox is dry with no water left inside before re-attaching.

3.By turning the speed control dial at the top of motor body, select a speed between 1 and 15.

Low Speed : 1

High Speed : 15

4.Place the whisk into the blending jug and press the trigger switch to turn the whisk on. The button must be held for the required duration of operation.

5.Move the whisk through the ingredients in the blending jug with a gentle raising and lowering motion until desired texture is achieved.

6.When whisking has finished, switch off the motor by releasing the trigger switch and remove the power plug from the power outlet.

7.Ensure the whisk has completely stopped rotating before lifting the whisk out of the blending jug.

To detach the whisk

Ensure the trigger switch is released and unplug the power plug from the power outlet.

Hold the motor body with one hand and using thumb and finger of the other hand, press on the two EJECT buttons on either side of the motor body. Pull the motor body away from the whisk to detach.

To use the whisk

For food preparation tips and recipes refer to page 19 and the recipes section.

Ensure the whisk is completely and properly assembled.

1.Place food to be whisked into the blending jug or a sufficiently large mixing bowl or container.

2.Insert the plug into a 110/120V power outlet.

13

BSB510XL_IB_A10_FA.indd 13

5/08/10 9:49 AM

Page 13
Image 13
Breville SLV3100 manual To Attach the Whisk, To detach the whisk, To use the whisk