OPERATION

5000W Portable Generator

PowerBOSS™

 

 

 

OPERATING THE

GENERATOR

CAUTION

Exceeding generators wattage/amperage capacity can damage generator and/or electrical devices connected to it.

•See “Don’t Overload Generator”.

•Start generator and let engine stabilize before connecting electrical loads.

•Connect electrical loads in OFF position, then turn ON for operation.

•Turn electrical loads OFF and disconnect from generator before stopping generator.

Starting the Engine

Disconnect all electrical loads from the generator. Use the following start instructions:

1.Make sure unit is on a level surface.

IMPORTANT: Failure to start and operate unit on a level surface will cause the unit not to start or shut down during operation.

2.Turn the fuel valve to the “On” position (Figure 4).The fuel valve handle should be vertical (pointing toward the ground) for fuel to flow.

Figure 4 — Fuel Valve

Fuel Valve is shown in the On position

3.Start engine according to instructions given in the engine owner’s manual.

WARNING

Rapid retraction of starter cord (kickback) will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises or sprains could result.

•When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.

•NEVER start or stop engine with electrical devices plugged in and turned on.

NOTE: If engine starts after 3 pulls but fails to run, or if unit shuts down during operation, make sure unit is on a level surface and check for proper oil level in crankcase.

This unit may be equipped with a low oil protection device. See engine manual.

WARNING

Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Severe burns can occur on contact.

Combustible debris, such as leaves, grass, brush, ect. can catch fire.

•DO NOT touch hot surfaces.

•Allow equipment to cool before touching.

•The generator must be at least 5 feet from structures having combustible walls and/or other combustible materials.

•Keep at least 3 feet of clearance on all sides of generator for adequate cooling, maintenance and servicing.

•In the State of California a spark arrester is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. If you equip the muffler with a spark arrester, it must be maintained in effective working order.

Connecting Electrical Loads

•Let engine stabilize and warm up for a few minutes after starting.

•Plug in and turn on the desired 120 Volt AC, single phase, 60 Hz electrical loads.

•DO NOT connect 240 Volt loads to the 120 Volt duplex receptacles.

•DO NOT connect 3–phase loads to the generator.

•DO NOT connect 50 Hz loads to the generator.

•DO NOT OVERLOAD THE GENERATOR. See “Don’t Overload Generator”.

Stopping the Engine

1.Turn OFF and unplug all electrical loads from generator panel receptacles. NEVER start or stop engine with electrical devices plugged in and turned ON.

2.Let engine run at no-load for several minutes to stabilize internal temperatures of engine and generator.

3.Turn engine off according to instructions given in the engine owner’s manual.

4.Move fuel valve to “Off” position.

9

Page 8 Page 10
Page 9
Image 9
Briggs & Stratton 030222 Operating Generator, Starting the Engine, Connecting Electrical Loads, Stopping the Engine
Page 8 Page 10

030222 specifications

Briggs & Stratton 030222 is a powerful and versatile portable generator designed to deliver reliable performance, making it an ideal choice for both home use and outdoor activities. With a robust design and advanced technology, this generator is built to handle a variety of situations, including emergency backup power, camping trips, and recreational activities.

One of the standout features of the Briggs & Stratton 030222 is its impressive power output. Equipped with a reliable engine, this generator can provide up to 2,500 watts of starting power and 2,000 watts of running power. This makes it capable of powering essential appliances such as refrigerators, lights, and more during an outage, ensuring that you remain comfortable and connected.

The generator features a durable frame that enhances its stability and longevity. It is built with high-quality components that withstand the rigors of transportation and variable weather conditions. Additionally, it includes built-in wheels and a handle for easy maneuverability, allowing users to effortlessly transport it to their desired location.

The Briggs & Stratton 030222 leverages advanced inverter technology, which not only delivers clean and stable power but also reduces noise levels, making it quieter than traditional generators. This is particularly beneficial for recreational use, where noise restrictions may apply. The inverter technology also ensures that sensitive electronic devices, such as laptops and phones, are protected from voltage spikes.

Another notable characteristic is its fuel efficiency. With an extended runtime, the generator can operate for hours on a single tank of gasoline, minimizing the need for frequent refueling. This feature is particularly advantageous during camping trips or long power outages.

Safety is also a priority in the design of the Briggs & Stratton 030222. It incorporates multiple safety features, including overload protection and low oil shutdown, which ensures that the engine does not sustain damage from running with insufficient oil. This adds an extra layer of reliability, giving users peace of mind during operation.

In summary, the Briggs & Stratton 030222 is an efficient and reliable portable generator that meets the power demands of various situations. With its strong power output, advanced inverter technology, fuel efficiency, and safety features, it stands as a solid choice for those in need of a dependable source of electricity, whether for home emergencies or outdoor adventures.
Top Page Image Contents