Maintenance12
Maintenance Schedule
Before Each Use
• Check engine oil level
• Perform Safety System Test
Every 8 Hours or Daily
• Check engine oil level
Every 25 Hours or Annually
• Lubricate control lever linkage
• Lubricate the auger assembly
• Lubricate the discharge chute rotation gear and deflector
• Lubricate the drive system hex shaft with
Every 50 Hours or Annually
• Check muffler and spark arrester (if equipped)
• Check tire pressure
Engine Maintenance |
|
For engine maintenance schedules and procedures, please refer | |
to the engine operator's manual. | Reproduction |
| |
Control Lever Linkage Lubrication |
Check the function of the Free Hand control (A, Figure 12). The | Auger Assembly Lubrication | |||||||
controls should function as described in the Operation sec ion. | Lubri ate Auger Gear Box | |||||||
WARNING |
|
|
|
|
|
| The a ger gear box is lubricated at the factory and should not | |
|
|
|
|
|
| req ire additional lubrication. If additional lubricant is required, | ||
|
|
|
|
|
| |||
|
|
|
| |||||
Amputation hazard |
|
| use the color of the remaining grease to determine what type of | |||||
It is critical for safe operation of the unit that the controls | lubricant to add. If the grease is white in color, add Lubriplate | |||||||
GR132 Grease or equivalent. If the grease is brown in color, add | ||||||||
disengage when released. Under no circumstances should | ||||||||
EP1 lithium grease. A gearbox lubricant capacity is | ||||||||
the unit be used if the controls do not function | erly. See | |||||||
(92 grams). | ||||||||
Safety Systems Tests to confirm correct operation. |
|
| ||||||
|
| Check the auger gear box grease level once per year. Using a | ||||||
Lubricate the linkage for the Free Hand control, sp | d s | l ct | ||||||
piece of wire as a dipstick, remove the filler plug (A, Figure 13) | ||||||||
control, and Easy Turn/Easy Steer control every | op | rating | and check to confirm the presence of grease in the gearbox. If | |||||
hours, or as necessary to ensure safe operation. |
|
| grease is visible, do not add. If grease is not visible add the |
required lubricant.
14