Briggs & Stratton Features and Controls, Engine Features and Controls, Snowthrower Features and Controls, Icon, Icon, Location, Location, Description, Description

Features and Controls	Location	Icon	Description
Engine Features and Controls	F		Free Hand™ Control (if equipped)- After
			engaging the traction control (left hand) and
For engine features and controls, please refer to the engine			auger control (right hand), allows the
			operator to release the auger control lever
operator's manual.			to use other controls.
Snowthrower Features and Controls	G		Traction Control Lever - Used to propel
			to engage, release to disengage. See also,
			snowthrower forward or reverse. Push down
3			"Free-Hand Control".
	H		Deflector Control - In-Dash (if equipped)
			- Used to control the angle of the deflector
			(up or down).
	I		Deflector Control - Manual (if equipped)
			- Used to control the angle of the deflector
			(up or down).
	J		Deflector Control - Electric (if equipped)
			- Used to control the angle of the deflector
			(up or down).
	K		Easy Turn™ Traction Control (if
			equipped) - When engaged, allows the
			operator to release one drive wheel, but
			allows the other wheel to continue driving
Reproduction			for easy turning.
			Grip Warmer Switch (if equipped) - Used
	L
			to warm the hand grips (high, off, low).
	M	-	Clean-Out Tool - Used to remove snow and
			debris from the discharge chute and the
			auger housing.
	N	-	Skid Shoes - Used to adjust the ground
			clearance of the auger housing.

Location	Icon	Description
A		Auger Control Lever - Us	to	ngage and
		disengage the auger and im ll		r. To
		engage, push down. To dis	ngag , lease.
B	3	Speed Select Lever - Allows the operator
	2	to select forward and reverse speeds. To
	1
		shift, move speed select lever to desired
		position.
	R1	NOTE: Do not move speed select lever
	R2
		while Traction Control is engaged. This
		may result in severe damage to the drive
		system.
C		Chute Rotation Crank - In-Dash (if
		equipped)- Used to rotate the discharge
		chute to the left or right.
D		Chute Rotation Crank - Lefthand Crank
		(if equipped)- Used to rotate the discharge
		chute to the left or right.
E		Chute Rotation Switch - Electric (if
		equipped)- Used to rotate the discharge
		chute to the left or right.

8