BSPP 1950 PSI Pressure Washer

ASSEMBLY

IMPORTANT: Read entire owner’s manual before you attempt to assemble or operate your new pressure washer.

Remove Pressure Washer From Carton

•Remove the parts bag, accessories, and inserts included with pressure washer.

•Slice two corners at the end of carton from top to bottom so the panel can be folded down flat.

•Remove pressure washer from carton.

PREPARING PRESSURE WASHER FOR USE

To prepare your pressure washer for operation, you will need to perform these tasks:

1.Add oil to engine crankcase.

2.Add fuel to fuel tank.

3.Connect high pressure hose to spray gun and pump.

4.Connect water supply to pump.

5.Attach nozzle extension to spray gun.

Carton ContentsItems in the carton include:

•Main Unit

•Goggles

•High Pressure Hose

•Spray Gun

•Adjustable Nozzle Extension

•Parts Bag (which includes the following):

•Hose Fittings

•Quick Connects

•Maintenance Kit

•Owner’s Manual

•Engine Manual

If parts are missing or damaged, contact the local Briggs & Stratton service center.

Add Engine Oil and Fuel

• Place pressure washer on a level surface.

CAUTION

Any attempt to crank or start the engine before it has been properly filled with the recommended oil will result in equipment failure.

•Refer to engine manual for oil and fuel fill information.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

•Refer to engine owner’s manual and follow oil and fuel recommendations and instructions.

NOTE: Check oil often during engine break–in. Refer to engine owner’s manual for recommendations.

6