Speed Clean™ 2500 PSI Pressure Washer
Add Engine Oil
IMPORTANT: Any attempt to crank or start the engine before it has been properly serviced with the recommended oil may result in an engine failure.
•Place pressure washer on a level surface.
•Refer to engine owners manual to add recommended oil to engine.
NOTE: Check Oil Often During Engine
Add Fuel
WARNING! NEVER fill fuel tank indoors. NEVER fill fuel tank when engine is running or hot.Allow unit to cool for two minutes before refueling. DO NOT light a cigarette or smoke when filling the fuel tank.
1.Uncoil the high pressure hose and attach one end of the hose to the base of the spray gun (Figure 5). Tighten by hand.
Figure 5 — Connect High Pressure Hose to Spray Gun
Connect high |
pressure hose |
here |
2.Attach the other end of the high pressure hose to the high pressure outlet on the pump (Figure 6).Tighten by hand.
Figure 6 — Connect High Pressure Hose to Pump
WARNING! DO NOT overfill the fuel tank. Always allow room for fuel expansion.
• Place pressure washer on a level surface.
• Refer to engine owners manual to add recommended fuel to engine.
Connect Hose and Water Supply to Pump
IMPORTANT: To avoid pump damage, you must assemble
3. Before you connect your garden hose to the water
the nozzle extension to the spray gun and attach all hoses
inlet, inspect the inlet screen (Figure 7). Clean the
before you start the engine.
screen if it contains debris or have it replaced if damaged. Refer to the section
6
