Operation

 

 

Mowing Height Adjustment

 

 

The cutting height adjustment pin (A, Figure 6) control

A

 

the mower cutting height. The cutting height is adjustable

C

between 1-3/4” (4,4 cm) and 5” (12,7 cm) in 1/4” (0,64 cm)

 

 

increments.

 

 

 

B

 

1. Depress the deck lift foot pedal (B) until it locks into the 5” (12,7 cm) position.

2. Place the cutting height adjustment pin in the desired cutting height.

3. Depress the deck lift foot pedal then push the lock lever

(C) toward the right to release the lock.

4.Release the deck lift foot pedal until it comes to rest against the cutting height adjustment pin.

Figure 6. Mowing Height Adjustment

A. Cutting Height Adjustment Pin

B. Deck Lift Foot Pedal

C. Deck Lift Lock lever

Foot Pedal Adjustment

 

 

 

 

B

 

The deck lift foot pedal can be adjusted to accommodate the

 

A

C

 

 

 

 

 

operator’s height for optimal comfort.

 

for

 

 

 

To adjust pedal position:

 

 

 

 

1. Remove the foot pedal (A, Figure 7) from the pedal

 

 

 

 

 

 

 

D

mount tab (B).

 

 

 

 

 

2. Remove the pedal mount hardware (C) and rotate the

 

 

 

 

 

tab 180 degrees.

 

 

 

 

 

 

3. Reinstall the pedal mount hardware and tighten secu ely.

 

 

 

 

 

Not

 

 

 

 

 

4. Reinstall the foot pedal on the pedal mount tab in the

 

 

 

 

 

proper orientation as shown in Figure 7.

 

 

 

 

 

 

 

 

Figure 7. Foot Pedal Adjustment

 

 

 

 

A. Deck Lift Foot Pedal

 

 

 

 

 

B. Pedal Mount Tab

 

 

 

 

 

C. Pedal Mount Hardware

 

 

 

 

 

D. Optional Position

 

 

 

Reproduction

 

 

18

www.SnapperPro.com