Briggs & Stratton Raise and Lower the Roll Bar

Operation

Raise and Lower the Roll Bar
WARNING	C
	D
AVOID SERIOUS INJURY OR DEATH FROM
ROLL OVER:
Keep roll bar in the raised position and use the
seat belt.
THERE IS NO ROLL OVER PROTECTION WHEN
THE ROLL BAR IS DOWN
Lower the roll bar only when necessary and
NEVER remove it.
Do NOT use seat belt when the roll bar is down.

Raise the roll bar as soon as clearance permits.					A
Do NOT jump off if mower tips.				B
To Lower the Roll Bar:				D
1.	Pull the hair pin clips (A, Figure 8) out of the retainer
	pins (B).
2.	Push or pull the top of the roll bar (C) forward against
				Figu e 8. Raise & L	wer the Roll Bar
	the rubber stops (D) and remove the retainer pins (B).
				A. Hair Pin Cl p
3.	Lower the roll bar into the down position (see insert,
				B. Retainer P n
	Figure 8).
				C. Roll Bar
To Raise the Roll Bar:				D. Rubber S op
			for
1.
	Pull the hair pin clips (A) out of the retainer pins (B) and
	remove the retainer pins.
2.	Raise the roll bar (C) until the rubber stops (D) contact
	the upright tubes.
3.	Push or pull the top of the roll bar forward against the
	rubber stops and reinstall the retainerNotpins and hair pin
		Reproduction

clips to secure the roll bar in the raised position.

19