Troubleshooting, Adjustment & Service

MOWING HEIGHT ADJUSTMENT

See Figure 18. The mowing height adjustment can be changed by turning the cutting height adjustment handle.

To Raise the Mower Deck:

Turn the cutting height adjustment handle (A, Figure 18) CLOCKWISE.

To Lower the Mower Deck:

Turn the cutting height adjustment handle COUNTER-

CLOCKWISE.

A

Figure 18. Cutting Height Adjustment A. Cutting Height Adjustment Handle

SEAT HEIGHT ADJUSTMENT

 

 

 

A

 

In addition to the operator seat being adjustable in the

 

 

 

 

 

forward and back position, the height of the operator

 

 

 

 

seat can also be adjusted up and down.

 

for

 

 

To Adjust the Seat Up and Down:

 

 

 

 

1.

Pull the seat adjustment lever (A, Figure 19)

 

D

 

forward and move the seat to the furthest forward

C

 

position to provide extra clearance between

he

 

 

 

 

 

seat and the gas tank.

 

 

 

 

2.

Loosen but do not remove the front seat m

unting

 

 

 

 

hardware (B).

 

 

 

 

B

 

3.

Remove the rear seat mounting hardware (C).

 

 

 

 

 

 

 

4.

Maneuver the seat mount (D) untilNotthe desired

 

 

 

 

 

height is achieved.

 

 

 

Figure 19. Seat Height Adjustment

 

5.

Reinstall the rear mounting hardware and th

n

 

 

 

A. Seat Adjustment Lever

 

 

tighten both the front and rear mounting hardware.

 

 

B. Front Mounting Hardware

 

 

 

 

 

 

 

6.

Pull the seat adjustment lever forward and adjust

 

C. Rear Mouning Hardware

 

 

the seat to the desired front and back position.

 

D. Seat Mount

 

 

 

Reproduction

 

30

www.ferrisindustries.com