Figure 31. Parking Brake Adjustment
A. Parking Brake Spring
ReproductionNot forB. Set Collar

Troubleshooting, Adjustment & Service

PARKING BRAKE ADJUSTMENT

1.Park the machine on a flat, level surface. Disengage the PTO, stop the engine, and engage the parking brake.

2.Chock the drive tires and then release the parking brake handle

3.Locate the two parking brake springs (A, Figure 31). One is located on the left rear side of the engine deck by the left drive wheel and the other is located on the rear right side of the engine deck by the right drive wheel.

4.Loosen the set collar (B) and then tighten it snugly against the white brake spring. Repeat process for other side.

5.Re-engage the parking brake handle and unchock the wheels.

If this does not correct the braking problem, see you Ferris dealer.

A

B

36

www.ferrisindustries.com