Features and Controls
Figure 2. Control Locations | for |
|
CONTROL FUNCTIONS
The information below briefly describesReproductionNotthe function f in ivi ual controls. Starting, stopping, driving, and NOTE: The further the pedal is moved away from the
mowing require the combined use of several cont ls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section.
Ground Speed Pedal |
| Ignition Switch | |
This pedal controls the ground speed of the | The ignition switch starts and stops the engine, it has | ||
rider. Depressing the pedal forward increases the | three positions: | ||
FORWARD speed of the rider, and depressing the |
|
| Stops the engine and shuts off the |
|
| ||
pedal rearward increases the REVE SE speed. |
|
| |
|
| electrical system. | |
|
|
| |
neutral position the faster the drive wheels will turn. |
|
| Allows the engine to run and powers |
|
| ||
|
| the electrical system. | |
|
|
| |
Parking Brake
Pull the parking brake lever back to engage the parking brake. Move the lever fully forward to disengage the parking brake.
NOTE: To start the unit the parking brake must be engaged.
NOTE: Allowing the lever to “snap” into the OFF position will place undue strain on the lever and brake linkages.
Cranks the engine for starting.
NOTE: Never leave the ignition switch in the RUN position with the engine
11