Operation

Starting the Engine

IMPORTANT: Always unplug the battery float charger before starting the generator.

Disconnect all electrical loads from the generator. Use the following start instructions:

1. Make sure unit is on a level surface.

IMPORTANT: Failure to start and operate the unit on a level surface will cause the unit not to start or shut down during operation.

2.Turn the fuel valve to the “On” position. The fuel valve handle should be vertical (pointing toward the ground) for fuel to flow.

3. Push engine rocker switch to run position (I).

4. Push choke lever to “Choke” position.

5A. For electric starting, push and hold the start switch in “Start” position until generator starts. To prolong the life of starter components, DO NOT hold start switch in “Start” position for more than 15 seconds, and pause for at least 1 minute between starting attempts.

NOTE: If battery is discharged, use manual starting instructions.

5B. For manual starting, grasp recoil handle and pull slowly until slight resistance is felt. Then pull rapidly one time only to start engine.

WARNING

Starter cord kickback (rapid retraction) can result in bodily injury. Kickback will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises, or sprains could result.

•When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.

•NEVER start or stop engine with electrical devices plugged in and turned on.

•If engine starts, proceed to step 7.

•If engine fails to start, proceed to step 6.

6.Move choke lever to “Half” choke position, and pull recoil handle twice.

•If engine fails to start, repeat steps 5 thru 7.

7.Slowly move choke lever to “Run” position. If engine falters, move choke lever to “Half” choke position until engine runs smoothly, and then to “Run” position.

IMPORTANT: If engine floods, place choke lever in “Run” position and crank until engine starts.

WARNING

Contact with muffler area can result in serious burns.

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.

•DO NOT touch hot parts and AVOID hot exhaust gases.

•Allow equipment to cool before touching.

•Keep at least 5 feet (1.5 m) of clearance on all sides of generator including overhead.

•Code of Federal Regulation (CFR) Title 36 Parks, Forests, and Public Property require equipment powered by an internal combustion engine to have a spark arrester, maintained in effective working order, complying to USDA Forest service standard 5100-1C or later revision. In the State of California a spark arrester is required under section 4442 of the California Public resources code. Other states may have similar laws.

NOTE: If engine starts after 3 pulls but fails to run, or if unit shuts down during operation, make sure unit is on a level surface and check for proper oil level in crankcase. This unit may be equipped with a low oil protection device. If so, oil must be at proper level for engine to start.

•If engine starts, proceed to step 7.

•If engine fails to start, proceed to step 6.

14

BRIGGSandSTRATTON.COM

Page 13 Page 15
Page 14
Image 14
Briggs & Stratton 8000 Watt Portable Generator manual Operation, Starting the Engine
Page 13 Page 15

8000 Watt Portable Generator specifications

The Briggs & Stratton 8000 Watt Portable Generator is a powerful and versatile solution for those in need of reliable electricity during outages, outdoor events, or job sites. As part of the renowned Briggs & Stratton lineup, this generator is designed to deliver robust performance, ensuring you have the power needed for essential appliances and tools.

One of the standout features of the Briggs & Stratton 8000 Watt Portable Generator is its impressive power output. With a starting wattage of 8000 watts and a running wattage of 6500 watts, this generator provides ample energy to support multiple devices simultaneously. Whether you need to power a refrigerator, air conditioner, or a range of power tools, the generator ensures that all your demands are met efficiently.

The generator is equipped with a 420cc engine, known for its durability and fuel efficiency. This engine is engineered to provide a reliable starting performance, even in cold weather conditions. With a large fuel tank capacity, the generator can operate for extended periods, allowing users to focus on their tasks without worrying about constant refueling.

Portability is another key characteristic of this generator. It features a compact design and is fitted with sturdy wheels and a foldable handle, making it easy to transport and maneuver. Whether you’re using it in your backyard or taking it to a remote job site, you can do so with ease.

Safety is paramount, and the Briggs & Stratton 8000 Watt Portable Generator includes advanced safety features such as an Integrated Low Oil Shutdown system that protects the engine from damage, ensuring longevity and performance reliability. Additionally, the generator's multiple outlet options, including standard 120V and 240V outlets, provide versatility for various power needs.

Another impressive aspect is the noise-reduction technology incorporated into its design. This allows the generator to operate quietly, minimizing disturbance, which is especially beneficial in residential areas or during nighttime use. With a solid warranty and support from a trusted brand, the Briggs & Stratton 8000 Watt Portable Generator represents an excellent investment for anyone seeking dependable portable power.

In summary, the Briggs & Stratton 8000 Watt Portable Generator combines high power output, robust engine performance, portability, and safety features, making it an ideal choice for users who require reliable and efficient electrical energy in various situations. Whether for home backup during outages or for professional use, this generator ensures that you are always powered up and ready to go.
Top Page Image Contents