Connecting Electrical Loads

1.Let engine stabilize and warm up for a few minutes after starting.

2.Plug in and turn on the desired 120 and/or 240 Volt AC, single phase, 60 Hz electrical loads.

NOTE:

•DO NOT connect 240 Volt loads to the 120 Volt duplex receptacles.

•DO NOT connect 3-phase loads to the generator.

•DO NOT connect 50 Hz loads to the generator.

•DO NOT OVERLOAD THE GENERATOR. See Don’t Overload Generator.

NOTICE

Exceeding generators wattage/amperage capacity can damage generator and/or electrical devices connected to it.

•DO NOT exceed the generator’s wattage/amperage capacity. See Don’t Overload Generator in the Operation section.

•Start generator and let engine stabilize before connecting electrical loads.

•Connect electrical loads in OFF position, then turn ON for operation.

•Turn electrical loads OFF and disconnect from generator before stopping generator.

Oil Pressure Shutdown

If engine oil pressure drops below a preset level, an oil switch will stop the engine. Check oil level with dipstick.

If oil level is between ADD and FULL mark on dipstick:

1.DO NOT try to restart the engine.

2.Contact a Briggs & Stratton Authorized Dealer.

3.DO NOT operate engine until oil pressure is corrected.

If oil level is below ADD mark on dipstick:

1.Add oil to bring level to FULL mark.

2.Restart engine. If the engine stops again a low oil pressure condition may still exist. DO NOT try to restart the engine.

3.Contact a Briggs & Stratton Authorized Dealer.

4.DO NOT operate engine until oil pressure is corrected.

Stopping the Engine

1.Turn OFF and unplug all electrical loads from generator panel receptacles. NEVER start or stop engine with electrical devices plugged in and turned ON.

2.Let engine run at no-load for several minutes to stabilize internal temperatures of engine and generator.

3.Push engine rocker switch to stop position (O).

WARNING

Backfire, fire or engine damage could occur.

•DO NOT stop engine by moving choke control to “Choke” position.

4.Move fuel valve to “Off” position.

Cold Weather Operation

Under certain weather conditions (temperatures below 40°F [4°C] combined with high humidity), your generator may experience icing of the carburetor and/or the crankcase breather system. To reduce this problem, you need to perform the following:

1.Make sure generator has clean, fresh fuel.

2.Open fuel valve (turn valve to open position).

3.Use SAE 5W-30 oil.

4.Check oil level daily or after every eight (8) hours of operation.

5.Maintain generator following Maintenance Schedule in Maintenance section.

6.Shelter unit from elements.

15

Page 14 Page 16
Page 15
Image 15
Briggs & Stratton 8000 Watt Portable Generator Connecting Electrical Loads, Oil Pressure Shutdown, Stopping the Engine
Page 14 Page 16

8000 Watt Portable Generator specifications

The Briggs & Stratton 8000 Watt Portable Generator is a powerful and versatile solution for those in need of reliable electricity during outages, outdoor events, or job sites. As part of the renowned Briggs & Stratton lineup, this generator is designed to deliver robust performance, ensuring you have the power needed for essential appliances and tools.

One of the standout features of the Briggs & Stratton 8000 Watt Portable Generator is its impressive power output. With a starting wattage of 8000 watts and a running wattage of 6500 watts, this generator provides ample energy to support multiple devices simultaneously. Whether you need to power a refrigerator, air conditioner, or a range of power tools, the generator ensures that all your demands are met efficiently.

The generator is equipped with a 420cc engine, known for its durability and fuel efficiency. This engine is engineered to provide a reliable starting performance, even in cold weather conditions. With a large fuel tank capacity, the generator can operate for extended periods, allowing users to focus on their tasks without worrying about constant refueling.

Portability is another key characteristic of this generator. It features a compact design and is fitted with sturdy wheels and a foldable handle, making it easy to transport and maneuver. Whether you’re using it in your backyard or taking it to a remote job site, you can do so with ease.

Safety is paramount, and the Briggs & Stratton 8000 Watt Portable Generator includes advanced safety features such as an Integrated Low Oil Shutdown system that protects the engine from damage, ensuring longevity and performance reliability. Additionally, the generator's multiple outlet options, including standard 120V and 240V outlets, provide versatility for various power needs.

Another impressive aspect is the noise-reduction technology incorporated into its design. This allows the generator to operate quietly, minimizing disturbance, which is especially beneficial in residential areas or during nighttime use. With a solid warranty and support from a trusted brand, the Briggs & Stratton 8000 Watt Portable Generator represents an excellent investment for anyone seeking dependable portable power.

In summary, the Briggs & Stratton 8000 Watt Portable Generator combines high power output, robust engine performance, portability, and safety features, making it an ideal choice for users who require reliable and efficient electrical energy in various situations. Whether for home backup during outages or for professional use, this generator ensures that you are always powered up and ready to go.
Top Page Image Contents