Maintenance
The power management system is designed to be maintenance free under normal usage. However, inspection and maintenance checks should be made on a regular basis. Maintenance will consist mainly of keeping the power management system clean.
Visual inspections should be done at least once a month. Access to power management system must not be obstructed. Keep 3 feet (92 cm) clearance around power management system. Check for an accumulation of dirt, moisture and/or corrosion on and around the enclosure, loose parts/hardware, cracks and/or discoloration to insulation, and damaged or discolored components.
Exercise the power management system at least once every three months as described in the previous section Testing the Power Management System unless a power outage occurs and Home Generator System has gone through automatic sequence. Allow generator to run for at least 30 minutes.
Contact a licensed electrical professional to inspect and clean the inside of your power management system at least once a year.
When Calling the Factory
Before contacting Briggs & Stratton regarding service or repair of this power management system, obtain the Model Number and Serial Number from the unit data decal located on or inside the enclosure.
To contact Briggs & Stratton call (800)
Specifications
Rated AC Voltage . . . . . . . . . . . . . . . . . . . . . . .125/250 Volts Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50/60 Hz
Relay Contacts
Rating . . . . . . . . . .125 VAC, 20A, 1 HP, 768 VA Pilot Duty Dimensions . . . . . .Approximately 16” H X 12” W X 6” Deep Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 lbs.
12 | BRIGGSandSTRATTON.COM |