Features and Controls
Read this Operator’s Manual and safety rules before operating your generator.
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
A |
|
| P |
B |
|
C | N |
D | M |
| |
E | L |
| |
F |
|
G | K |
| |
H | J |
|
A - Fuel Tank — Capacity of seven (7) U.S. gallons.
B - Fuel Valve — Used to turn fuel supply on and off to engine.
C - Choke Lever — Used when starting a cold engine.
D - Air Cleaner — Protects engine by filtering dust and debris out of intake air.
E - Recoil Starter — Used to start the engine.
F - Engine Rocker Switch — Set this switch to "On" before using recoil starter. Set switch to "Off" to switch off engine.
G - Oil Fill Cap — Check and add engine oil here. H - Oil Drain Plug — Drain engine oil here.
J - Grounding Fastener — Consult your local agency having jurisdiction for grounding requirements in your area.
K - Identification Label — Provides model, revision and serial number of generator. Please have these readily available when calling for assistance.
L - Rocker Switch Circuit Breaker — The receptacles are provided with a rocker switch circuit breaker to protect the generator against electrical overload.
M - 120/240 Volt AC, 30 Amp Locking Receptacle — May be used to supply electrical power for the operation of 120 and/or 240 Volt AC, 30 Amp, single phase, 60 Hz electrical, lighting, appliance, tool and motor loads.
N - Spark Arrester Muffler — Exhaust muffler lowers engine noise and is equipped with a spark arrester screen.
P - 120 Volt AC, 20 Amp, Duplex Receptacles — May be
used to supply electrical power for the operation of 120 Volt AC, 20 Amp, single phase, 60 Hz electrical, lighting, appliance, tool and motor loads.
10 | BRIGGSandSTRATTON.COM |
