Step 10
Attach side burner assembly to grill body assembly by inserting four M6 X 20mm bolts through the holes in the side burner assembly and into holes of grill body assembly. Tighten all four bolts. Install side burner grate and control knob.
Side burner grate
Step 11
Remove the plastic cap on gas supply manifold and attach rubber gas hose to gas supply manifold. Hand tighten first, then use supplied wrench to turn brass nut an additional 1/8 turn.
Important: Do not overtighten. This could damage brass fitting.
Warning: Never use your grill without leak testing all gas connections and hoses. See the section on “Leak Testing” in this manual for proper procedures. (See page 7)
Step 12
Attach side burner igniter lead to the electrode as illustrated.
25
Screw Holes
Rubber | Side Burner | Electrode |
Igniter Lead |
| |
Gas Hose |
|
|
Brass Nut |
|
|
