Figure 1 | Figure 2 |
Right Side Table Assembly
M5 X 12 mm
Figure 3
Silver Bolt
Figure 1
Hole
Sear Burner Valve
Figure 2
Sear Burner Knob
Bezel
Pin on Bottom
Step 12
To attach the right side table assembly, first insert the side table’s fixed stands onto the grill body hooks (Figure 1).
Open the grill hood, then use one M5 X 12 mm bolts (black) and one M6 washer to secure the right side table assembly to the grill body from the inside (Figure 2).
Use two M6 X 12 mm (black) bolts and one M6 X 12 mm (silver) bolt to secure the side table base (Figure 3).
Step 13
Remove the two M4 X 10 mm bolts and spring washers from the sear burner valve.
Insert the sear burner valve assembly through the hole in the side burner table base (Figure 1).
Place the bezel over the control knob mounting stem and position over holes in side burner table base and sear burner valve assembly. Attach with two M4 X 10 mm, bolts that came with valve.
Then install the sear burner knob onto valve stem (Figure 2).
26
